Jump to content
SAU Community

Recommended Posts

I am hoping someone knowledgable with installing various engine management systems into cars other that skylines can offer some advice... Yes I know it's not a Skyline!!!

My dad has just bought a E30 BMW as a project car with the 2L straight six in it, he is going to turn it in to a track car. We are going to probably get a gt3071r turbo for it with a 0.64 rear on it, with a cheap Chinese exhaust manifold to suit.

Question is, what would be a decent but reasonably priced engine management solution to suit such a car with that turbo and supporting bits and pieces?

Another thing, I had a look at it tonight and it's got a distributor... How difficult would it be to hook a CAS from say a skyline up to it and then (with an engine management system) try and convert it to individual coil on plug ignition?

Thank you.. :cheers:

how much power are you going to be pushing this engine? the Vipec V44 will run this engine with ease with the distributor.

If you are not going to need to lean on the ignition system there is no real reason to change the triggers, also if you must change them look at the other trigger systems available, ie crank triggers.

I just did an E30 Racecar. If its a later E30 it will have Motronic CAS, if its an early model just buy the Motronic CAS from a wrecker. I used a Haltech Platinum and find them unbeatable.

Is the Dizzy on the nose of the cam or in the side of the block? If on the front of the Cam its got the motronic Trigger.

Edited by N I B

I'm not really sure what it will do! 220rwkw would be nice as it's a light little car. Thanks for the info :cheers:

how much power are you going to be pushing this engine? the Vipec V44 will run this engine with ease with the distributor.

If you are not going to need to lean on the ignition system there is no real reason to change the triggers, also if you must change them look at the other trigger systems available, ie crank triggers.

Yep it's got the Motronic ECU, distributor is on the end of the cam at the front. Good to hear you got one running with the Haltech, another possible option. I am actually now thinking a full replacement ECU might be overkill for his requirements. I came across this kit:

http://millerperformancecars.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=65&category_id=45&vmcchk=1&option=com_virtuemart&Itemid=30

might even give that a try, a cheap and dirty solution to get more fuel into :action-smiley-069:

Anyway thanks for the info everyone. Back to Skylines now!

:domokun:

I just did an E30 Racecar. If its a later E30 it will have Motronic CAS, if its an early model just buy the Motronic CAS from a wrecker. I used a Haltech Platinum and find them unbeatable.

Is the Dizzy on the nose of the cam or in the side of the block? If on the front of the Cam its got the motronic Trigger.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...