Jump to content
SAU Community

Z32

DTCHMN
 Share

Recommended Posts

DTCHMN Rookie

DTCHMN

Posted
Posted

got a used z32 air flow metre for sale.. bought it for $370 about 4-5 months ago (i never got to put it on), ill let it go for $320..

doesnt have the plug, but it can be bought for about $15 & i've been told its not needed anyway..

i'm in melbourne, but will send interstate.. PM me, or leave a msg here..

Link to comment
https://www.sau.com.au/forums/topic/38125-z32/
Share on other sites
DTCHMN Rookie

DTCHMN

Posted
  • Author
Posted

nah, thats fair enough - i know that i'm probably on tha average/higher end of the price scale, but i paid heaps for it coz there seemed to be hardly any goin at the time & i didnt end up usin it & now i'm lettin it go for 50 - 60 bucks less than i paid..

the dude who i bought it off hardly used & so it is in pretty good cond. - i know you're in melbourne r31nismoid, so you can come have a look if ya want..

edit - and i dunno about $270-300 bein pretty normal, coz i've seen around 3 or more for sale lately for more than my price - i know you do get a guy who wants to get rid of it heaps bad occasionally & sells it real cheap, but thats not very often..

Link to comment
https://www.sau.com.au/forums/topic/38125-z32/#findComment-770481
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

im with coulton on this.

the going price Vic (2nd hand) has been 270-300 for the past 2 months as far as im aware

But i'm VERY keen. Being melb i'll come and check it out for sure.

Where abouts in Melb are you?

Link to comment
https://www.sau.com.au/forums/topic/38125-z32/#findComment-770664
Share on other sites
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...