Jump to content
SAU Community

Wanted: Rb20 Loom

daniel12

By daniel12,
in Tasmania

 Share

Recommended Posts

tobs_r32 Collaborator

tobs_r32

Posted
Posted

Hey bud do u need the entire loom?? We had an RB25 loom and Rb20 loom and have made one loom to run an RB25 in an r32 so if there are any parts of the loom u need i could get them for you... i.e coilpack, injectors ecu?? if not.. ur welcome to take whats there and you'll probably have to just splice some plugs back on where we have chopped them off. Might be easier to just find a complete one but yeah there if u need it mate!

rb.20.4ht Rookie

rb.20.4ht

Posted
Posted

need a loom for a rb20det asap

0467624901

Hey mate i have a complete harness if ur still chasing and cant get ur hands on any locally, i just bought a replacement engine and it came as a package so dont need the rest of things on it like std turbo,manis,wiring harness etc etc..

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • PranK
      My BMW 335i

      By PranK · Posted

      This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • PranK
      My BMW 335i

      By PranK · Posted

      Yeah, I am super excited for this.
    • Murray_Calavera
      R33 Fuel Pump & Brakes after alarm swap

      By Murray_Calavera · Posted

      Was the car running before he touched the car?
    • soviet_merlin
      My BMW 335i

      By soviet_merlin · Posted

      😛 
×
×
  • Create New...