Jump to content
SAU Community

Recommended Posts

WRECKING 1993 R33 Gts-t

will be getting this car home tomorrow so will be able to get alot more pics and details then will also go over the condition of everything listed

Burgandy in colour most panels have some damage.

lower drivers control arm and tie rod are bent everything else sus wise looks fine

The car was stock for nearly all its life recently had exhasut filter bleed valve and ran a massive 9psi

PARTS FOR SALE:

18" Chrome rims (might be starcorps) little bit of dish (some minor rash) tyres will need replacing $700 will need crap rims as part exchange so i can keep the car rolling for now

GTR rear spolier and boot in good condition $200

GTR style front Grill $80

Complete Brake package (calipers/rotors/lines) $**OFFERS**

Stock Turbo and manifold $300 (will confirm condition when i remove)

Sideskirts (400r style i think) minor damage more inside the arch not that visable $80 pair

Tail lights $100 pair or $60 each

Full 3" Exhaust system with HKS super dragger rear sections $350

another rear exhuast section (bolts right at back of car) with muffler $50

Stock Fuel pump $40

Stock Steering Wheel (non airbag) $150 seems mint condition but will check again once i take the cover off :)

Headlights (only 5 months old) great condition just need a clean dont think they genuine nissan $350 *ON HOLD*

Air con pump and lines will check on condensor condition $100

Stock Intercooler kit and all pipework (even has plastic air scoop) does have some oil in pipework but will try clean $100

non air bag dash $100 pretty sure was good condition will check

Centre console $80

Strut Brace $80 (will check brand)

Stock Diff (non abs) $60

Door trims $40

Skyline floor mats $*offers* (will sus condition)

Carpet $*offers* (will sus condition)

all windows apart from windscreen $*offers*

****ALL PRICES ARE NEGOTIABLE****

STUFF IM KEEPING FOR THE MOMENT:

Engine

Gearbox

Engine Loom

ECU

Front cross member

Tailshaft

no doubt there are many parts i havent thought of so if your chasing something let me know!!

Car will be located in the Northern suburbs of Adelaide

contact me via PM or [email protected] or SMS me on 0417080960

post-4329-0-97595800-1319935379_thumb.jpeg

Edited by shy_s6
  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

Handbrake set up sold

strut brace sold

drivers window switch and regulator sold

Seats Front/rears (drivers seat has been patched but looks alot better then a hole) with matching door trims and rear trims $250 the lot few minor marks but other then that looks the goods :)

carpet seems to be in excellent condition $ **offers**

Edited by shy_s6

got the turbo off and she looks very mint.. almost to mint so did a quick search and it has twin blades on front wheel meaning its from a series 2 or its been rebuilt at some stage?? anyone got more info on how i can find out whats in it?

PRICES DROPPED ON SOME BITS

$300 for the headlights due to finding a crack in one of the mounts (not broken off) which really doesnt have any effect on the lights

$60 for gtr grill

$50 for sideskirts need a bit of TLC

the seperate rear Exhaust section is made by Kakimoto $50

Full Exhaust system consists of 3' dump/front pipe full 3' system with HKS super dragger muffler sounds really good $300

Turbo $400

Centre console $60

floor mats ON HOLD

central locking actuators SOLD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...