Jump to content
SAU Community

Is It Normal For This To Happen?

skyln-r33!
 Share

Recommended Posts

skyln-r33! Enthusiast

skyln-r33!

Posted
Posted

When I hold my foot on the break to come to a complete stop, hard or soft, the car after it hits a certain amount of revs it kinda pulls the car forward as I pull up at the lights.

If I just hold the break peddle down quite hard the revs drop a fair bit and than pops back up. You feel the car being pulled a bit more forward without doing anything different. Whats the go? Lol. I have to, after I press the break paddle, loosen my foot off the peddle so the car doesnt drop in the revs. Still pulls the car forward...

Also another thing that might have something to do with that ^^^ I was driving it the other night not fast just normal and I felt it lagging pretty bad like it didnt want to idle any higher than all of a sudden, I stopped at the traffic lights like normal and pulled off from them and the car struggled to even move. I pushed the peddle all the way in than all the way out. Nothing! It moved but not very fast or even above 20km/h. It was like dying on me I swear. I was so worried cause I dont know what it was.. Its happened once before yet ive only had the car what like two weeks. I turned the car off straight after it lagged like that for about 10 minutes and it was fine but I know it wasnt normal. Hate stressing bout it :(

Link to comment
https://www.sau.com.au/forums/topic/381663-is-it-normal-for-this-to-happen/
Share on other sites
skyln-r33! Enthusiast

skyln-r33!

Posted
  • Author
Posted

Well I need new bearings but no where is cheap enough for me as im struggling a bit on money... :S Does that mean anything? Do you recon the full body throttle needs a good cleaning?

R34Fatpig Rookie

R34Fatpig

Posted
Posted

Have u ever tightened the accelerater cable at all?

When I hold my foot on the break to come to a complete stop, hard or soft, the car after it hits a certain amount of revs it kinda pulls the car forward as I pull up at the lights.

If I just hold the break peddle down quite hard the revs drop a fair bit and than pops back up. You feel the car being pulled a bit more forward without doing anything different. Whats the go? Lol. I have to, after I press the break paddle, loosen my foot off the peddle so the car doesnt drop in the revs. Still pulls the car forward...

Also another thing that might have something to do with that ^^^ I was driving it the other night not fast just normal and I felt it lagging pretty bad like it didnt want to idle any higher than all of a sudden, I stopped at the traffic lights like normal and pulled off from them and the car struggled to even move. I pushed the peddle all the way in than all the way out. Nothing! It moved but not very fast or even above 20km/h. It was like dying on me I swear. I was so worried cause I dont know what it was.. Its happened once before yet ive only had the car what like two weeks. I turned the car off straight after it lagged like that for about 10 minutes and it was fine but I know it wasnt normal. Hate stressing bout it :(

skyln-r33! Enthusiast

skyln-r33!

Posted
  • Author
Posted

It was in snow like the setting haha. Maybe that had something to do with it lagging... mmm lol. and Im wondering if theres some sort of non stock system put in my car where if i just sit there in drive the car randomly tries to go forward with me just holding the break and ive noticed if i pull the steering wheel to the left or right it does the same thing where it revs up and tries to move the car forward like it wants to go somewhere but im not doing it. Really weird.... Does anyone know what it could be? Thanks

Hanaldo Grand Master

Hanaldo

Posted
Posted

It was in snow like the setting haha. Maybe that had something to do with it lagging... mmm lol. and Im wondering if theres some sort of non stock system put in my car where if i just sit there in drive the car randomly tries to go forward with me just holding the break and ive noticed if i pull the steering wheel to the left or right it does the same thing where it revs up and tries to move the car forward like it wants to go somewhere but im not doing it. Really weird.... Does anyone know what it could be? Thanks

Ok, resisting the urge to make fun of you being a woman right now, I'll try to help :P

I don't really understand your description of the first issue, so I'll leave that one alone. The second issue, the lagging, sounds like a misfire. Especially if it stopped after you turned the car off and on again. So did the car sound any different? Like a WRX sort of sound? I would be checking spark plugs. Potentially coilpacks as well but that's generally associated with high rpm misfires rather than low load.

As for your last post... It doesn't sound like there is any actual issue there. Automatic cars will move as soon as you take your foot off the brake, that's the stall point of the torque converter. And turning the steering wheel in a car with power steering puts load on the engine, so the revs need to go up with it.

Of course I may have completely misinterpreted your descriptions and I'm way off lol. If you could get a video of said problems then that may help thumbsup.gif

skyln-r33! Enthusiast

skyln-r33!

Posted
  • Author
Posted

Yes I may be a girl but I do know a bit about cars just the things I post on here im just double checking that its all good :blush:

Yes I understand that whole thing with autos its just in my last car which no wasnt a skyline but it never did anything like that. Older yes and not a drift car haha. So I talked to a mate of mine and he said its not normal for the revs to go up like it did.. Just sitting there the car tried to pull itself forward when I did absolutely nothing.. It does it sometimes.. You see the idle moving a bit to.. And I did a service on it thinking it would do something.. The car just runs better but does the same stupid shit lol. The sprak plugs were chenged, oil and coolant and filters and the coil paacks are new so no problem there.. I thought the revs doing that was normal for a skyline because i thiought it does it to help you turn corners but the whole just sitting there on the spot the car tries to go forward on its own aint normal haha

Ok, resisting the urge to make fun of you being a woman right now, I'll try to help :P

I don't really understand your description of the first issue, so I'll leave that one alone. The second issue, the lagging, sounds like a misfire. Especially if it stopped after you turned the car off and on again. So did the car sound any different? Like a WRX sort of sound? I would be checking spark plugs. Potentially coilpacks as well but that's generally associated with high rpm misfires rather than low load.

As for your last post... It doesn't sound like there is any actual issue there. Automatic cars will move as soon as you take your foot off the brake, that's the stall point of the torque converter. And turning the steering wheel in a car with power steering puts load on the engine, so the revs need to go up with it.

Of course I may have completely misinterpreted your descriptions and I'm way off lol. If you could get a video of said problems then that may help thumbsup.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      M35 Aftermarket Fuel Pump

      By MBS206 · Posted

      Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...