V35 Brake Rotor And Pad Replacement Time

[ridemyjansen]

Hi all,

The time has come for me to replace the brake rotors and pads on my 2003 v35. I have the brembo package and i'm at a bit of a loss as to go about the whole process of ordering the pieces. I plan on doing the job myself so all I need is the parts. It seems a lot cheaper to order from the states so I'm wondering if the parts for a g35 would directly correspond my v35. Some have said that I am supposed to order parts for the 350z touring? Can anyone shed some light on this? If anyone knows the exact measurements of the front and rear rotors that would also be greatly appreciated.

If anyone has any relevent input, advice or similar experience, please don't hesitate to share because this will be my first time doing this and I need all the help I can get.

Thanks in advance guys!

[scotty nm35]

You already had a thread that you never replied to...

http://www.skylinesaustralia.com/forums/topic/381338-v35-brake-service/

What is it you need to know, just ask for replacement parts for a 350z track with Brembo's I guess. (Touring had the single piston callipers.)

Again, I have a spare front seal kit here if you need one, P/N 41120-12U25. It is for any Nissan Brembo apparently.

Keep the stock disks if you can, just machine them. They are much better quality than you will get locally.

[gslrallysport]

Hi all,

The time has come for me to replace the brake rotors and pads on my 2003 v35. I have the brembo package and i'm at a bit of a loss as to go about the whole process of ordering the pieces. I plan on doing the job myself so all I need is the parts. It seems a lot cheaper to order from the states so I'm wondering if the parts for a g35 would directly correspond my v35. Some have said that I am supposed to order parts for the 350z touring? Can anyone shed some light on this? If anyone knows the exact measurements of the front and rear rotors that would also be greatly appreciated.

If anyone has any relevent input, advice or similar experience, please don't hesitate to share because this will be my first time doing this and I need all the help I can get.

Thanks in advance guys!

Hi mate,

Not sure what you're using the car for, but assuming just end high street, then we can supply the following:

DBA 4000 Series Slotted Rotors (Australian made) $198 per rotor front or rear

OR

RDA Slotted Rotors $299 per pair front or rear.

As far as pads go, either QFM HPX (Bendix Ultimate equivalent, but low dust and rotor wear), or European made Remsa (what we supply as a trade servicing pad for high end Euro sports cars). Both are $119 for the front, and $110 for the.

Any questions at all feel free to give us a bell on 1300 884 836, or checkout our section:

www.skylinesaustralia.com/forums/forum/217-sau-trader-gsl-rallysport-promotions/

Regards,

Greg