Jump to content
SAU Community

Recommended Posts

I fitted a Mallory distributor to the C210 last weekend, and was very pleased with the results. I plugged it into the existing wiring and it worked greatly.

I also had a go at fixing the electric fan that has been playing up (running continuously when the car is off/cold, and failing to run when the car is hot.)

Unfortunately, it seems that the two problems are linked. The fan is still continuing to play up, and the ignition module for the lovely new distributor suddenly fried on Tuesday. I used a multimeter and found that the + and the - from coil to distributor both have power. That's not right is it?

I think there must be a short somewhere that is causing the fan and distributor both to fail.

Link to comment
https://www.sau.com.au/forums/topic/382499-c210-wiring-woes/
Share on other sites

  • 1 month later...

Update. The car ended up stranded at a radiator mechanics (given I initially wanted a new switch soldered into the radiator) with a dead ignition module. I supplied another distributor and gave permission for a them to have it towed to a local auto electrician to sort out the wiring, and hopefully kill two birds with one stone (revive the buggy fan and stop the new ignition module from frying).

Anyway, the auto-electrician kept the car for over a month. Finally I got a call from the radiator guy saying the car was finished and running again, and they would go and get it in the morning. I expected to get bent over by the auto-electrician, and sure enough, the radiator guy told me that the auto electrician's bill had run up to $700 odd.

WTF? I don't remember giving anyone permission to clock up the better part of a grand's worth of... wiring. That's over a day's labor to find and fix a short and swap a distributor.

Any suggestions on how to deal with this?

After grumbling on the phone a bit, when I arrived it turned out that $700 was the total for everything: an hour's labour at $100 for the radiator mechanic to call a tow truck, $80 for the tow truck, $100 for a standard bosch coil (source of wiring oddness), and 5 hours labour at $95 an hour to fit the coil. Greaaaaaat...

Anyway, I did some homework with consumer affairs; turns out a mechanic has every right to hold your car for nonpayment. The onus is on you to demand a quote before the mechanic starts work (or at least an estimate), force them to call if it's going over budget, find out what the mechanics labor rate is, and to find out what they will charge for any parts likely needed (I can tell you now if I knew they wanted $100 for a $50 coil I'd have told them to stick it on principle alone.)

The long and short of it is find out if you are going to get screwed before you hand the keys over, cause there is probably bugger all you can do about it once you have.

Better yet, fix your car yourself!

  • 2 weeks later...

5hours labour to replace an ignition coil? It's two screws, a plug and a couple of terminal nuts. 10-15 mins TOP! That being said, tracing electrical problems, even even in old cars, is troublesome and time consuming at the best of times. Also, its never a good idea to get a workshop to send you car anywhere else as they will add their own markup to what the other guy charges as well. If it has to go elsewhere, take it yourself.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...