Jump to content
SAU Community

Recommended Posts

Hey stagea owners,

Up for sale is my oem Nismo catback exhaust, this item is up for sale due to a exhaust upgrade. The diameter of the piping for the Nismo exhaust is 2.5", This exhaust produces quite a bit more power and sound as opposed to the standard catback on some stageas which i have driven. Never experienced any drone which is why i enjoyed having this exhaust.

After $150 posted at your expense.

Link to comment
https://www.sau.com.au/forums/topic/383176-series-2-c34-catback-exhaust/
Share on other sites

Sure no worries still currently waiting on a catback from japan will try to get the exhaust off tomorrow for a little bit to snap some photos, just thought id give a little bit of information below on the exhaust..

Exhaust is definitely within the legal db range of 91db or 90db. You can barely hear it idle when you stand behind it but when you put your foot down to open it up it should start to get moderately loud above 3.5-4k rpm. Car currently has driven 101,xxx km and the condition of the exhaust would have to be "good-excellent"

Ill get around to them photos tomorrow

Hey scott,

Sorry no photos as of yet, been trying to sort out my damn belt squeeling which took me pretty much all day. Ill have some photos uploaded before 12p.m tomorrow

Yeah man im willing to ship interstate at buyers expense

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...