Jump to content
SAU Community

Recommended Posts

1989 Burgandy over silver Sillhuette Skyline

In Perth Western Australia

r32 Silver Top Rb20det Engine conversion

r33 RB25det Gearbox with H/D clutch and one piece tailshaft

4.11 Diff with Mini spool

Hi-Flow VG30 Turbo with T04 Compressor wheel in Machined Housing and Vl turbo cut back Exhaust wheel

Mine's Plug in ECU

Malpassi fuel Regulator

650 In tank Denso fuel pump

GReddy Profec A boost controller

Hybrid Style 600x300x76 Front mount intercooler With Stainless piping

K and N Podfilter

Full 3 inch Stainless steel exhaust with Trust style twin dump pipe

Autometer temp guage

Blitz Boost guage

Front Facing Plenum

Strut Brace

GTS import Struts and brakes

Schnieder 5 Spoke 16inch rims x 4

Modena 17inch rims x 2

Sony Flip Face CD Deck

Car is licenced as a RB20DET

The car was dynoed about 12 months ago At 290 rwhp I would suggest that this is a little conservative and from drag racing times it probably has more like 310 rwhp

It weighs 1320 kg with half a tank of fuel and full interior and spare tyre.

The best time of this car is 12.55 @ 111.8 mph on 10/4/03 at the Perth motor plex Drag combat. This was with full interior and street tyres (Khumo Exctas Supra 17"). The car took out 2nd place in the rwd 6 cylinder class.

dsc01944.jpg

It is obviously the car in the far lane.

I am selling this car because for me its a completed Project and i really really want to start a new one. I have an apexi powerfc to suit rb20det (r32) and 6 550cc injects that can be negotiated with on sale or will be sold seperately. The fuel pump and FMIC are less then 1 month old. The turbo was hi flowed / rebuilt when it went on the car about 1 year ago and would have about 7000kms on it. The 25 gearbox was put in about 6 months ago with new clutch and tailshaft. The body of the car is straight but could use a touch up of paint on the boot. The interior is pretty stock but in relatively good condition.

The driveline is in my mind bullet proof and could take another 100 hp easily. With slicks and the extra power it would become a very low 11 second car. Which is still very streetable.

The price is $9750 negotiable, and there are things i will take out or swap to change the price if you would like.

Contact me via email [email protected]

Thanks for your time, This teaches me how much i have spent on the car :D

Link to comment
https://www.sau.com.au/forums/topic/38325-12-second-89-skyline-for-sale/
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...