Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

Here are my last steps to got my car ready =)

This was at the end of June

2012-06-21004003.jpg

2012-06-21004048.jpg

2012-06-21004138.jpg

Later I picked up the car to Aalen (about 100km) by a trailer. Jonne from Sky-Engineering visited us to map mine and some other cars at High Import Performance in Aalen.

2012-06-21113339.jpg

2012-06-21155023.jpg

At first Jonne mapped the car on the road and after that on the AWD-Dyno

2012-06-22123335.jpg

Here is the result and a little video (@1.35bar) the car couldn`t hold the boost...

Dyno550hp650nm001.jpg

The biggest problem now, the synchro of my 3rd gear is damaged =( And this after my big rebuild of 2 years...

Anyway... I was happy to get my car home =)

Arrived home, I got some new nice stuff for the GTR from Bene (Japo-Motorsport)

Stoptech brake kit with 355mm discs front and rear and 18" Nismo GT4 wheels with Toyo R888 tires for track use =)

2012-07-05234554.jpg

2012-07-06081608.jpg

2012-07-06044530.jpg

2012-07-06050219.jpg

2012-07-06050333.jpg

2012-07-06200942.jpg

2012-07-06200930.jpg

Here my two setups:

Nismo LM GT4 in 18x9.5+15 with 265/35 R18 Toyo R888 Tires for track use

and

Varrstoen S2.2 in 19x10.5+12 with 275/30 Kumho Tires for street use

2012-07-06072921.jpg

2012-07-06073008.jpg

2012-07-06081210.jpg

2012-07-06081307.jpg

Here a little repair

2012-07-06143737.jpg

2012-07-06143751.jpg

At last, here my first shooting session at home =)

DSCF1561.jpg

DSCF1560.jpg

DSCF1556.jpg

DSCF1554.jpg

DSCF1553.jpg

DSCF1545.jpg

DSCF1541.jpg

DSCF1535.jpg

DSCF1529.jpg

DSCF1520.jpg

Now, a really big thx to Uwe, Daniel and Benny from High Import Performance (H.I.P.) for this really nice work!! Thanks to Jonne and Wayne from Sky-Engineering for the mapping. I also have to thank you to Marco, Marc, Dino and Bene (Japo-Motorsport) for your help!!

So, next things to do:

- repair the getrag (service at all synchros)

- put on the aero catch to the carbon bonnet

- ...

- ...

- ...

  • 4 weeks later...

Here you can see my last video from Reisbrennen 2012, onboard where you can see how I slide on my own lost cooling water

and here a nice video with a friend and his Evo6 TME together

  • 2 weeks later...

Here the best pics of PixelRev ( http://www.pixelrev.de/ )

2012_PixelRev_Reisbrennen_IMG_0054_1600.jpg

2012_PixelRev_Reisbrennen_IMG_0151_1600.jpg

2012_PixelRev_Reisbrennen_IMG_0157_2_logo_1600.jpg

2012_PixelRev_Reisbrennen_IMG_0195_1600.jpg

DSC_0330.jpg

DSC_0331.jpg

DSC_0340.jpg

DSC_03492.jpg

DSC_0349-2.jpg

DSC_0359-2.jpg

DSC_0365.jpg

DSC_0369-2.jpg

DSC_0374-2.jpg

DSC_0377-2.jpg

DSC_0379-2.jpg

DSC_0389-2.jpg

DSC_0395.jpg

DSC_0403.jpg

DSC_0429-2.jpg

No other news until yet.

Okay, one thing. I want to change the Tein suspension. My Tein Typ RA is really to hard!!! Impossible to drive in city or Autobahn...

Maybe the suspension is good for track, but I want to have a lil bit daily use too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...