Jump to content
SAU Community

EOI: Tech Night - 2 - Car Security And Theft Prevention


Recommended Posts

18th then. it has to be a sat arvo after 1pm.

didnt forget about the dinner. I will be doing the dinner for the club breakup. happy laps I cannot really do without breaking something on the subie.

im keen, but certainly wont be bringin the line.<br>

up to you :)

put it this way the last one was all club members this one at a glance will be at least half and if you are worried about your car being pulled from the crowd , pull me a side afterwards and ask me to quietly look at it.

I had a few people last time that were worried about it (one volunteered a car then withdrew the offer) that simply pulled me a side and asked questions.

the one that withdrew did attend and actually learned a couple of things that session and pulled me aside afterwards.

DATE : 18/12/11

TIME : 1pm

PLACE: 11 GOULD RD Herston

BOOKING IN:

I REQUIRE

your full name

phone numbers (home and mobile)

your MATES phone numbers (if you bring one)

once I have that your name will go on a list.

if you name IS NOT on that list -

YOU ARE NOT INVITED AND WILL BE ASKED TO LEAVE

list is open for bookings now.

how does the arvo of DEC 10 sound. (that's a Saturday for those not paying attention)

joel watling,

you car is one I WANT there. and I think you know why. I would like to talk to you prior to this as I want to discuss a few things with you.

Well i will pretend you didnt just call me Joel then :nyaanyaa:

yeah I goofed!!

it's on the 18th. I was going to close early on the 10th but figured the SATURDAY after would work better.

yeah I goofed!!

it's on the 18th. I was going to close early on the 10th but figured the SATURDAY after would work better.

Yea, especially if guys have to go home and get their partner for a formal event :no: lol

i would like to go the next one if you have another one as im just waiting on my car back from the work shop, as i paid $1400 for my alarm installed at jb hifi a while ago and know i'm going to regret how dodgy it possibly is

i would like to go the next one if you have another one as im just waiting on my car back from the work shop, as i paid $1400 for my alarm installed at jb hifi a while ago and know i'm going to regret how dodgy it possibly is

I would like to talk to you. pm me your phone number please.

How long would this go for?

1pm-2pm? Longer?

I would like to attend and let you use my car (34) as an example - as long as 0 harm is done with the screwdrivers...

Will need to confirm with the misses that the date you have set, that we have nothing planned.

I have a mongoose alarm installed by autobarn for $600... would like to see how it goes

rich,

nah no damage. I will probably drop the lower panel off yours though and if I can find what I'm looking for quickly do what I need to and get out of it.

send me a pm with your details once you know whats going on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...