Jump to content
SAU Community

Missfire Developing When Hot - Code 21 - Ignition Wiring


Recommended Posts

Hi,

I've been battling a problem for the last month with my r32,

I drive it for 20 mins or so and all of a sudden it sounds like it has dropped a cylinder.

I have been reading alot of similar problem stories online in hope of an answer as it seems to be a common problem.

However what is causing my problem does not. So i thought I would write up about it in case someone else

comes across the same problem and hopefully understand a bit more myself.

So far I have replaced the following:

Spark Plugs

Coil Packs

Fuel Filter

Fuel Pump

---

Took out ECU and ran a diagnostics test, Came up with Code 21 - Ignition Circuit Problem

Alright so wtf do I do now. Haha ended up checking earth points, nothing.

Played with the PTU (Power Transistor Unit) / Ignition Amplifier while the problem was occurring, pushing around the plug on the right side and

It acted up a bit more / would unsteady the idle briefly. HMM bingo

Or is it? I have a new Coil Pack harness on the way seeing as i might as well replace that too. But I'm unsure what to do about the PTU

I have no multimeter or the slightest clue how to test it, other then its f**ked get a new one. However I would like to know my options regarding it first and my ECU for that matter if anyone could shed light on the topic that would be exceptional. Cheeers

Best way to diagnose would be to borrow/try a known working ptu, coilpack harness and ecu, try 1 at a time to see which is the problem

Yep well I put in a new harness today and reset the ecu and it still acts up so, I do know a mate with one so hopefully he lets me borrow his ptu, then I think i'll get it tuned. Thanks mate :yucky:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...