Jump to content
SAU Community

Recommended Posts

this saturday (3rd dec) the westcoast jetsprint club will be hosting the eastwest showdown

some of the best drivers from the east coast will be making the treck over to take on the local teams

check the website for details www.jetsprintwa.com.au or our facebook page WEST COAST JETSPRINT CLUB inc

should be a great day of high class racing

GWP

oh and dont forget to cheer for firm racing ( under suspicion and prime suspect)

Link to comment
https://www.sau.com.au/forums/topic/384404-westcoast-jetprint-special-round/
Share on other sites

was a great day with a huge turnout specially since we were competing with the drags

our boats did well with my driver and i getting the hang of the faster ride and different handling and our b team getting a podium finish

the other boat was right up there till the engine pretty much let go but they had qualified for finals so putted a lap to get themselves a podium as well

there was an unusual large number of crashes and engine damage including the complete wrecking of one of the group a boats (brand new too)

but other than a bit of bruising and a concusion nobody was hurt

its looking like its going to be a huge season we start again on the 14th of january

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...