Jump to content
SAU Community

Recommended Posts

hi all i have a marone r33 gts that im selling the remaining parts off. these are the parts for sale.

1) center consule less arm rest $50 no marks

2) drives side pillar cover and passangers side $50 no marks on both.

3) 2x complete a/c and heater boxes plus a/c fans for s1 and s2 $100m each.

4) glove box from s2 $30

5) front left guard no dints or marks $100

6) front right guard no dints or marks $100

7) rear boot $100

8) rear wing $50

9) r33 s1 diff 4.11 ratio $150

10) bonnet s1 no donts but some paint flake (clear mainly)

11) rear bar $50

12) front mount intercooler that plaumb into factory intercooler pipes in left side of car. core is 300h x 400w x 80mm d all pipe work tig alluminium $150 in good condition no dints and still clean.

13) front bumper suport bar $50

14) drivers side or passangers side windows $50 bucks each.

the radiator support pannel is perfect if any one wants it left me know and ill take it out of the car as well.

Link to comment
https://www.sau.com.au/forums/topic/385186-wrecking-r33-parts/
Share on other sites

would you have any pic's of the front mount and would you be able to ship at my cost

yea i can send pics just pm me you mobile number and ill sort it out.

air box and snorkel sold.

front bar support and front indicators sold pending payment,

intercooler still available unless old mate get back to me with a number?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...