Jump to content
SAU Community

Recommended Posts

hi all i have a marone r33 gts that im selling the remaining parts off. these are the parts for sale.

1) center consule less arm rest $50 no marks

2) drives side pillar cover and passangers side $50 no marks on both.

3) 2x complete a/c and heater boxes plus a/c fans for s1 and s2 $100m each.

4) glove box from s2 $30

5) front left guard no dints or marks $100

6) front right guard no dints or marks $100

7) rear boot $100

8) rear wing $50

9) r33 s1 diff 4.11 ratio $150

10) bonnet s1 no donts but some paint flake (clear mainly)

11) rear bar $50

12) front mount intercooler that plaumb into factory intercooler pipes in left side of car. core is 300h x 400w x 80mm d all pipe work tig alluminium $150 in good condition no dints and still clean.

13) front bumper suport bar $50

14) drivers side or passangers side windows $50 bucks each.

the radiator support pannel is perfect if any one wants it left me know and ill take it out of the car as well.

Link to comment
https://www.sau.com.au/forums/topic/385186-wrecking-r33-parts/
Share on other sites

would you have any pic's of the front mount and would you be able to ship at my cost

yea i can send pics just pm me you mobile number and ill sort it out.

air box and snorkel sold.

front bar support and front indicators sold pending payment,

intercooler still available unless old mate get back to me with a number?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...