Jump to content
SAU Community

Recommended Posts

Hey guys, sent my stag in.for its major service,running fine and they called me to tell me that its now dropped a cylinder. im shit with cars but know thats a lil bit of a problem, should i be ready to dish out $$$ or could it just be a small thing?

Link to comment
https://www.sau.com.au/forums/topic/385318-major-sevive-troubles/
Share on other sites

the first thing that should be checked is the spark. and at a guess, either a coilpack or the coilpack loom is stuffed. i only mention the loom as it would have been removed during the service and the looms can sometimes be a bit brittle with age. it is also common for the coils themselves to start to fail with at there age.

the mechanic should be able to figure it out what the issue is, and the reality is that it could a a number of different things, coilpacks being the most common fault though.

if he does come back and say its coils expect to shell out about $650 for a set of new spitfire coils. the coil pack looms were around the $200 mark last time i saw them.

with a bit of luck the mechanic might not have plugged all the coils in properly, or even used the wrong spark plugs.

Edited by QWK32

For some reason a valve was sticking or some crap, idles and drives fine. A mechanic friend seemed abit unconvinced about what the workshop said.

They said the head may need yo be reconditioned but they are not 100% SURE wat was the cause

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...