Jump to content
SAU Community

Recommended Posts

Have some goodies that have come out of the GTR for sale. All in full working order, just selling due to upgrades. Some pics included, will take more during the week. Will post at buyer's expense but would prefer pickup esp for the bigger items.

1. HKS EVC 4 Boost Controller (This is sometimes listed as an EVC 5 in the US). Good used condition, $400 SOLD

2. HKS CAMs - Step 2, 264 in, 272 ex (Note, these are not drop ins, need upgraded valve springs) Perfect condition, $600 SOLD

3. Standard R32 GTR intercooler $100 SOLD

4. HKS Upgraded Actuators. These came off my HKS GTRS turbos and did hardly any k's. I believe that they have an adjustment of boost level 0.8 to 1.1 bar or thereabouts - $250 SOLD

5. 18 x 9.5" Sparco wheels with rubber +23 up front for caliper clearance and +22 with bigger dish up back. Purchased from Import Monster to be my track wheels and had them on my car for about 5 minutes before finding out they didn't clear my front brakes $1000 $650 (Link on Import Monster http://www.importmon...roducts_id=1087) SOLD

6. 17 x 9" White sparcos (will go out and check offset later when I get pics) but a lot of you have seen them on my GTR. I love these wheels (and it pains me to sell them!) but they also don't clear my brakes. Restored and resprayed white, all good condition except for some gutter rash on one where I had a retarded parking moment - very easily repaired. No rubber on these... $750

th_P1010011-1.jpg th_P1010044.jpg

7. Pair of R32 GTR standard Sumitomo front calipers. Good condition for their age, have pads with reasonable amount left on them (unsure what the pads are). $200 SOLD

8. Twin HKS GT-RS turbos packaged with upgraded Garrett actuators (were $400), Tomei dump pipes and Tomei manifolds $4500 $4000. Whatever gaskets and bolts are left will be thrown in. All in fabulous condition, selling because I've finally bitten the bullet and gone for a big single. Note this would cost upwards of $6k plus postage to put together yourself and there are hardly any ks done on these parts! :)

th_IMG_2490.jpg th_IMG_2489.jpg th_IMG_2486.jpg th_IMG_2485.jpg th_IMG_2484.jpg th_IMG_2478.jpg th_IMG_2477.jpg th_IMG_2476.jpg

9. R32 GTR stock intake plenum painted black $150 SOLD

10. R32 GTR stock harmonic balancer $100

th_IMG_2493.jpg th_IMG_2492.jpg

11. R32 GTR water and oil lines $100
th_IMG_2483.jpg


12. Brand new HKS Oil Pump for RB26 $1600
th_IMG_3263.jpg th_IMG_3262.jpg

13. CRD Race Head including cams - PM for specs $8000ono including cams, $7500ono without cams - SOLD

14. Tomei 2.8L Stroker used but in great condition. This is the 86.5mm non cooling channel variant - $3500 sitting in cracked block, selling because I bought a complete motor

15. Trust 115mm Intercooler, near new, great condition some minor stone dents - $1200
***For this price I will throw in the Trust hard piping kit ($600 new inc shipping!) which minus 1 or 2 silicon joins but otherwise complete****.
This model shown at RHD Japan http://www.rhdjapan....-hg-bnr32-26959
SOLD

Link to comment
https://www.sau.com.au/forums/topic/385481-r32-gtr-bits-for-sale/
Share on other sites

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

For all those that are asking, the cams are being sold because I was looking for more power. They saw me happily to 400kw and sounded amazing in the car, I loved the lumpy idle from the different stages.

Will be adding a few more items to the list in coming weeks including a Trust 115mm frontmount, HKS fuel rail and HKS 800cc injectors.

My garage is getting too full, buy my stuffs!!! :)

Here's some closeups of each of the tyres. There's some minor camber wear and a small amount of cracking - cracking was there when I bought them and hasn't worsened. Make sure you check up the closeups on the import monster add, shows the gutter rash that's on the wheels. They're by no means perfect, I was intending on having them sanded back and powdercoated.

th_IMG_1919.jpg th_IMG_1918.jpg th_IMG_1917.jpgth_IMG_1916.jpg

  • 3 weeks later...
  • 1 month later...
  • 4 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...