Jump to content
SAU Community

Work Xd9 5X114.3 Matt Bronze 17X8.5 +32 And 17X9.5 +38 With Re001. Nice Dish On Rear!

s-dot
 Share

Recommended Posts

s-dot Rookie

s-dot

Posted
Posted

As the title says, I am putting up beloved XD9's as it is time for a change in look.

Model: Work Emotion XD9

Colour: Matt Bronze

Size specs: 2x (17x8.5 +32) 2x (17x9.5 +38)

Tyres: Bridgestone RE001 all round. Front specs are 215/45/17, while the rear is 235/45/17

Location: Brisbane

PRICE: $1500

General Condition: 3 of the rims are in absolutely mint condition, however 1 has some rash as depicted by the photos below. Tyres still have good meat on them, which you can also see below. FYI, Lock nuts do not come with the rims and tyres.

Feel free to throw me an offer, but I am not in a desperate situation to sell, thus lowballers will be ignored.

I am open to shipping interstate, however it will be arranged by the buyer

Photos:

6575135209_be82804292_b.jpg

6575134773_654dc776c9_b.jpg

6575133165_a65f996894_b.jpg

6575122185_fd391a3d1a_b.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • -Jimmy-
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By -Jimmy- · Posted

      Great work! Thanks for documenting the process.
    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • Dobz
      [Geelong,Vic] Used: pull type R33 GTR gearbox (no transfer case), Nismo super coppermix twin plate clutch

      By Dobz · Posted

      price drop $1000 gbox $400 clutch
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Take the fall as a warning sign for future endeavours  Stay safe mate
×
×
  • Create New...