Jump to content
SAU Community

Recommended Posts

What club do you do supersprints with?

Best to check with them and previous sup regs for an event as this will give you the best answer.

If it is going to be 'log booked' it needs to be built to a certain class.

wat car is it?

Log Booking is more for actual racing not time attack.

Its a CAMS thing, they have different racing categories, for Example: Sports Sedans, Improved Production Car, Formula Ford, Formula V, V8 Supercar, Saloon Car, HQ and so on. Each Category has a number reference, Improved Production is CAMs "3J", Sports Sedans is CAMS "3D"

If you have your car log booked it means it meets the criteria and regualtions for the category it log booked. You have to have the car built to meet the category and ready to race before it can be log booked. If for example you decide to log book your GTR as an Improved Production Car 3J. Once your car is ready to race a CAMS inspector will inspect it for saftey, then another category inspector will inspect it for eligibilty. The eligibilty test it to make your you haven't cheated and it meets technical requirments for the category you have applied for.

Log booking will dramatically increase the value of your car.

GTR car be a Sports Sedan, Street Car or Improved Production Car and im sure a few others.

Here is the list

CAMS Categories

You can click on each one and read the regulations

I hope that helps

Ash

I think you can logbook it as a PRC rally car too :banana: . I haven't kept up with the latest rally regs, but I know that last year the ARC cars were able to run without the turbo restrictor (which for a 2.6L GTR would absolutely kill performance). If you could run it sans restrictor, it's be a hell of a lot of fun on gravel. Maybe not the fastest thing out there, but lots of fun and spectacular!! :devil::devil:

As for dramatically increasing the value of the car - I kinda agree. Certainly will make it more desirable, as it is considered to be more of a race car, rather than an ebay parts special covered in stickers (which some of the track day cars can be). How much actual value it adds can be debated though. Personally, if I were wanting a race / rally car I'd certainly be after one with a logbook.

Log books are irrelevant for categories. I can log book a GTR as anything I want( tin top categories obviously) eligibility is another matter. A sports sedan an race with IPRA or prod cars providing it meets the regulations.

Log books are a CAMS insurance requirement to make sure that vehicles which are unregistered have been deemed safe by a cams inspection. The liability they face with vehicles is massive and logbooks are the only way to keep track of the vehicles safety aspect/ safety history/crash history etc etc.

It has nothing to do with category requirements.

Log books are irrelevant for categories. I can log book a GTR as anything I want( tin top categories obviously) eligibility is another matter. A sports sedan an race with IPRA or prod cars providing it meets the regulations.

Log books are a CAMS insurance requirement to make sure that vehicles which are unregistered have been deemed safe by a cams inspection. The liability they face with vehicles is massive and logbooks are the only way to keep track of the vehicles safety aspect/ safety history/crash history etc etc.

It has nothing to do with category requirements.

Maybe be different over on the east coast, but in WA it has to meet the technical requirements of the category you are applying for.

So you can log book your GTR as a V8 Supercar or HQ or Saloon car? So CAMS would log book Darren Hossacks SAAB sports sedan as an Improved Production car? I dont think so.

I have logged booked several cars. In WA the CAMS Scruitineed will check itfor general regulations and then a CAMS category inspector will check it and it will have to be within the rules of the category you are applying for. It must be in a race ready state of build.

Here is the application form form I sruitineer will comeout and check it, he will have a big checklist.

Ash

Edited by kingscorp

Maybe be different over on the east coast, but in WA it has to meet the technical requirements of the category you are applying for.

So you can log book your GTR as a V8 Supercar or HQ or Saloon car? So CAMS would log book Darren Hossacks SAAB sports sedan as an Improved Production car? I dont think so.

I cant log book MX5s for IPRA, only certain classes - I was thinking the same as Ash on this.

Mind you I dont work in the field, just assuming my answer at the start as thats what Ive been told in the past about the topic.

Obviously the GTR can't Race in a one make series like HQ's or super cars.....

It doesn't matter what the log book says though. Logbook inspections are not done to determine eligibility they are done to determine saftey aspects and accordance with the cams manual.

Normally here you'll have a pre race scruit check done by one of the series scruiteneers to check actualy eligibility.

Ive just done an r32 which was loged as an IPRA car to race in production. No new log book just a pre race inspection. The cars log book still says it's an IPRA car but it's doing the prod car championship this year.

Like I said you can't log one as a formula ford or superkart etc that's just stupid.

But what you do logbook it as has absolutely no bearing on what categories it can race in.

To get back to the original question - generally a car is log booked with CAMS/AASA/Irace mainly because those organisations require it to enter many events.

Pretty much any event will require a log book if your car is not registered; the more serious events will require a log book whether it is registered or not. For a CAMS logbook you really only have to comply with schedule A, B and J.

You will also need to chose a category for the log book, as per the discussion above, my experience is they don't really check eligibility at this check (or at most events either, but don't get me started on that...). But if there was something obviously wrong for a requested category I think they would issue the log book under another more appropriate one.

No the procedure is fairly simple.

You build the vehicle according to ALL the manual sections that are relelvant. Not A B and J. All the general requirement sections must be compliable.

The manufacturer of the cage completes a ROPS registration form.

You the owner complete a log book application form, then organize a pre log book inspection.

That inspection should cover all the cams shedules Inc fire, wheels/tires (size is irrelevant at this point)

Pass or fail the inspector completes the last page of your log book application forms. At this stage you nominate a category to log book the car, ( it's not important which category)

Once log booked you then decide you want to race IPRA.

The IPRA association will have a pre race inspection scruiteneer come and view the vehicle ( alot of the tw this can be done at the same time as the log book inspection)

This inspection checks for elligiablity. Wheel sizes, restrictors, panel work, interior trim etc etc etc.

Pass or fail the form gets completed and submitted back to the assosiation.

Pass, your now elligable to race, fail you need rectifications.

Log book inspection will check all cams shedules for general requirements.

Pre race inspections will check for elligabilty and conformity to the categories rules.

If at any time you now decide to race the same car in production touring. Call the prod inspector and have an elligabilty inspection done (after you know it is right)

The log book can still say IPRA but you are eligible for prod touring as the car passed the inspection.

I've done 4 cars already this January all of which were don't this exact way by 3 separate scruiteneers.

Also worth mentioning is as of 1/1/2012 there is now differnent requirements in the general requirements for club, state and national race levels.

Not sure if previously competing vehicles will be exempt from the new regulations but cams couldn't give me the answer today so I'd assume not at this time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
    • Ha ha ha, so they stopped the bearings spinning on the one you want, but then decided the crank hub should slip instead 😛   Stick to RB, at least you can work on it yourself. And now it doesn't smell of vapour   Also I still believe there's a chance your new flap doesn't "pop", as even though the engine might breath hard, it has a direct path with no restriction to the inlet, which when on boost should pull a bit of suction for you. If you do get pressure in the catch can id be very intrigued. Time to put a boost gauge on it, and a session at the track, then solid cover your vent and do another session
×
×
  • Create New...