Jump to content
SAU Community

Recommended Posts

Hi Guys , sorry for the delay , just got home from Tassy.

VIC STATE CRUISE is ON!

22nd Jan is the date , two weeks away , just before Aust Day, UPPER Yarra Dam is the location , There will be TWO assembly points . 1st Mick will be at Monash Uni off Wellington Rd meeting time 10.00 am for a 10.30 departure and will LEAD the group and travel via the same route as the cancelled Lilydale lake cruise but continue on through Lilydale and turn right at Maroondah Highway and then right into Warburton Hwy , then onto Jarra Junction (approx 28km).

Second Assembly point will be approx 800mtrs through Yarra Junction on your left (plenty of room to park) where the Western suburb guys can meet with Adam and Myself if they wish, that will get us to the dam somewhere aruond 1.00/1.30pm , bring your own everthing BBQ`s are on site.

PLEASE REMEMBER THAT WE ARE USING PUBLIC ROADS ,HOONING,SPEEDING WILL BE FROWNED ON AND WE ARE THERE TO HAVE A GOOD DA Y,

Does anyone know how to contact the "V" guys it will be greatly appreciated.

Any Questions . Dennis.

P.S. I will do a map any update the post.

Link to comment
https://www.sau.com.au/forums/topic/387666-vic-state-cruise/
Share on other sites

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

coparts - I'm assuming the second meeting point (for the westsiders) is the car park at Yarra Junction Reserve??? and what would be the best time to meet (best case senario according to Google Maps is around 12ish)..

Is anyone bring Walkie Talkies??

Sorry to throw some rocks on your road...but are you sure about the route?was checking it through Google (long story short ,the miss has problems with mountain roads so I checked first...)in your second map you are following the yarra river course ...don't know just asking,Thanks.

post-52922-0-88785800-1326699337_thumb.jpg

post-52922-0-40540500-1326699347_thumb.jpg

post-52922-0-30691000-1326699358_thumb.jpg

11.30 / 12.00 sounds good to me ,area no 2 as mentioned is approx 800 meters through Yarra Junction on your left (it is the old highway before the realignment ) and yes most of the route follows the river and winds up through the hills to the Dam, bitumen road is good as we traversed it in the opposite direction the last cruise

Hi Guys , sorry for the delay , just got home from Tassy.

VIC STATE CRUISE is ON!

22nd Jan is the date , two weeks away , just before Aust Day, UPPER Yarra Dam is the location , There will be TWO assembly points . 1st Mick will be at Monash Uni off Wellington Rd meeting time 10.00 am for a 10.30 departure and will LEAD the group and travel via the same route as the cancelled Lilydale lake cruise but continue on through Lilydale and turn right at Maroondah Highway and then right into Warburton Hwy , then onto Jarra Junction (approx 28km).

Second Assembly point will be approx 800mtrs through Yarra Junction on your left (plenty of room to park) where the Western suburb guys can meet with Adam and Myself if they wish, that will get us to the dam somewhere aruond 1.00/1.30pm , bring your own everthing BBQ`s are on site.

PLEASE REMEMBER THAT WE ARE USING PUBLIC ROADS ,HOONING,SPEEDING WILL BE FROWNED ON AND WE ARE THERE TO HAVE A GOOD DA Y,

Does anyone know how to contact the "V" guys it will be greatly appreciated.

Any Questions . Dennis.

P.S. I will do a map any update the post.

What time do you guys anticipate arrival and departure of second meet point? I'm hoping to join you guys there. Actually thinking of selling my V36 Coupe and buying a Stagea!

Chris

I might meet you guys at Lilydale.

Anyone else from the North/North East want to meet me somewhere then hook up with the main bunch @ Lilydale?

Well, my Mrs has just informed me that she won't be out that long in the morning and she's booked us in to look at a couple of cars for her early Sat morning so I'll probably lob at the meet point and shuffle off with everyone but at some stage zig when you guys zag and head home.

So, who's heading to Monash from the north/north east?

well you can meet up with me at maccas bell street if you want

It's a bit of a shizen place to get to, but it'll be early on Saturday so traffic should be pretty light.

I'll meet you there at 9am.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...