Jump to content
SAU Community

Recommended Posts

Hey guys,

I need of some cleaning in my garage with bit's i have used over the years and need to pay some bills so some stuff has to go!

Have a look through the list and lemme know if you need anything! Can be flexible with prices within reason. Most stuff prefer pickup because it's just easier and quicker but some of the smaller stuff I can do postage.

- Clarion APX4240 240W 4ch amp, Good working condition $100

- Pioneer DEH-8650MP CD/MP3 player. Comes with facia case, user manual, remote, line out connector and a pre made loom to plug it straight into a R34 GT-T. $150

- 2x 3m Aeropro RCA leads, blue, one end straight, one end right angle. $20

- Clarion Pro Audio 12 Disc CD Stacker. Rare as, CeNet connection for older units, Model CDC1255z. Works a treat, $150.

- Response 2x150w Amplifer. Model AA-0434 This is one of the old Jaycar amps that won many competitions. Very rare and this one is in mint condition. $150.

- Clarion V-Net Series 460 Amplifier. 4x50w. Solid amp and small footprint. $50

- Autometer Ultra-Lite Pro Comp Vacuum Gauge. Comes with Carbon look cup and bracket. I think its 66.7mm (the bigger Ultra-Lite ones) Mint condition. $60

- Autometer Ultra-Lite Pro Comp Air/Fuel Ratio Gauge. Also comes with Carbon look cup and bracket, This one is 52.4mm. $40

- Raizin Pivot Volt Stabilizer - Came with my car, don't really require it. $30?

- Clarion 12" Sub in a grey carpet box. 400h 320w 460d Model CLV12 - $120

- SiJ High Power Halogen Lamps - Got these from Japan years ago, work great, very bright. Comes with switch, wiring, 2 lamps, brackets etc. $50

- 12v-240v Inverter. 150W. Great little unit, works awesome. Comes with some leads to connect it to the battery. $150

Pickup location, Dandenong North, Vic.

Thanks!

20120112193513.th.jpg

20120112193634.th.jpg

20120112194519.th.jpg

20120112194813.th.jpg

20120112194841.th.jpg

20120112194903.th.jpg

20120112194922.th.jpg

20120112194952.th.jpg

20120112195025.th.jpg

20120112195239.th.jpg

20120112195339.th.jpg

Edited by Shoujiki

- Clarion APX4240 240W 4ch amp, Good working condition $80

- Pioneer DEH-8650MP CD/MP3 player. Comes with facia case, user manual, remote, line out connector and a pre made loom to plug it straight into a R34 GT-T. $100

- 2x 3m Aeropro RCA leads, blue, one end straight, one end right angle. $10

- Clarion Pro Audio 12 Disc CD Stacker. Rare as, CeNet connection for older units, Model CDC1255z. Works a treat, $80.

- Response 2x150w Amplifer. Model AA-0434 This is one of the old Jaycar amps that won many competitions. Very rare and this one is in mint condition. $100.

- Clarion V-Net Series 460 Amplifier. 4x50w. Solid amp and small footprint. $50

- Autometer Ultra-Lite Pro Comp Vacuum Gauge. Comes with Carbon look cup and bracket. I think its 66.7mm (the bigger Ultra-Lite ones) Mint condition. $40

- Autometer Ultra-Lite Pro Comp Air/Fuel Ratio Gauge. Also comes with Carbon look cup and bracket, This one is 52.4mm. $40

- Raizin Pivot Volt Stabilizer - Came with my car, don't really require it. $20

- Clarion 12" Sub in a grey carpet box. 400h 320w 460d Model CLV12 - SOLD

- SiJ High Power Halogen Lamps - Got these from Japan years ago, work great, very bright. Comes with switch, wiring, 2 lamps, brackets etc. $20

- 12v-240v Inverter. 150W. Great little unit, works awesome. Comes with some leads to connect it to the battery. $80

Prices dropped and items updated! Need this stuff GONE so i can buy a new monoblock for my car!

  • 2 weeks later...

Bump! Clarion V-Net Amp is now sold.

Final items remaining:

- Clarion Pro Audio 12 Disc CD Stacker. Rare as, CeNet connection for older units, Model CDC1255z. Works a treat, $50.

- Response 2x150w Amplifer. Model AA-0434 This is one of the old Jaycar amps that won many competitions. Very rare and this one is in mint condition. $80.

- SiJ High Power Halogen Lamps - Got these from Japan years ago, work great, very bright. Comes with switch, wiring, 2 lamps, brackets etc. $20

- 12v-240v Inverter. 1500W. Great little unit, works awesome. Dual Outlet. Comes with some leads to connect it to the battery. $60

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...