Jump to content
SAU Community

Recommended Posts

Don't let me detract from your sale, this is a very nice car, i looked at the website.

Correct me if i am wrong, but, according to the dyno chart, that power output was made at 25psi at a theoretical speed of 185km/h.

That would explain the big power output from such limited mods.

Is that an aftermarket sunroof too ??

All in all, good car for the money, good luck with the sale.

Mr Rb20 No dude. See how there is 2 black lines and 2 red lines, one set of lines is for how many kw and for how much boost is running at that time. The red lines read 185kws at 8 psi and the black reads 201kw at 12psi. Also see as the car gets to 201kw the boost that its running drops down close to 10psi, wich is natural for it to do.

Don't let me detract from your sale, this is a very nice car, i looked at the website.

Correct me if i am wrong, but, according to the dyno chart, that power output was made at 25psi at a theoretical speed of 185km/h.

That would explain the big power output from such limited mods.

Is that an aftermarket sunroof too ??

All in all, good car for the money, good luck with the sale.

Hell NO 25psi, my turbo would have been out the exhuast at that much psi dude...

This is a standard turbo and computer not even a SAFC no bullshit with a proper upgrade front mount with exhaust at max 13psi producing 201kw.

Fair enough. That's were the big power comes from then, shoot out mode reads a lot higher than tune. It's supposed to be for 'shoot outs' (duh) and consistent across different dynos, but people change setttings etc. and it makes it unconsistent which makes it hard to say how much power it really produces... that said a mate of mine had his VK 308 dyno'd in shoot out mode and it put down 158rwkws which would be very close to engine power not rear wheel power. Nice car mate anyways mate, still interested in it. Could you please send pics to my email? [email protected]

Just I can't see them here. It's blocked on my end.

ALT 18" WITH 265 AT THE REAR 245 AT THE FRONT.

MY PRICE IS NOT INCREASING....I JUST DONE SOME RESEARCH ON THE NET AND I REALISED THE PRICE THAT I WAS ASKING FOR IS A BIT LOW WITH ALL MY MODS, ACCESSORIES AND CONDITION OF THE CAR SO I DECIDED TO BUMP IT UP 1g

don't you know skylines appreciate with time......jus wait till u actually go and see the car he'll probably jack it up more..... its a collectors model with extra high head rest adjustment :usuck: and its also gts-t now how rare are they these days be quick boys jus been valued by nissan they sounded really keen on it!!!

u guys who are saying 201 is really high, well dynos are really meant for tuning, and its well known that figures vary a lot between dynos, so u cant say 201 is too high, because in that case, why is it too high? where is your control point?

just as a guide (not to take away from how powerful the car may be...)

most people say that a gts-t with just a cat back is good for about 130rwkw.. well at the place that ron15h had his dyno done, (unigroup if im not mistaken) they say that most near stock gts-ts produce around 145-155 rwkw.

i got my car dynoed there.. 96 gts-t with in box filter, and (resrictive because of defect) cat back exhaust. the figure was 165rwkw..

so you could say that this car for sale is capable of producing around 20% more power than stock. this would be an easier way to measure things up rather than dyno figures from all over the place :(

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...