Jump to content
SAU Community

3Rd Annual Pre-Powercruise Dyno Day 18.02.12 Newcastle


Recommended Posts

Copied from another forum thanks :thumbsup:

It's that time again. The 3rd annual PRE-POWERCRUISE dyno day will be held Saturday the 18th of February

Will kick off at 8:30am at 4b ACTION Mitchell st Cardiff.

Come down and run your car so you know every thing is running sweet before you flog the car for 3 days at the big event. Or just come down to see what other cars make

Categories

4 cyl N/A - 4 cyl forced

6 cyl N/A - 6 cyl forced

8 cyl N/A - 8 cyl forced

FWD

HP per litre

Highest HP overall

Encouragement award

The dyno is a DYNO DYNAMIC 2WD dyno ( sorry all you AWD people)

There will be a trade stands from AUTOBAHN with all your performance parts and car care specials for sale, and a BBQ going all day.

Price is $60 for 3 power run and a print out of hp,kw,AFR,boost etc and a free sausage sizzle and can of drink

Please check your water and oil levels are topped up before your car gets run up

Hope to see every one there

Link to Facebook page

http://www.facebook....25744700793397/

best bet to get in and pay your money early they only have 50 spots.

  • 4 weeks later...

I was the first up on the Dyno managed a 190rwkw at 13psi untuned with healthy afr's so was pretty happy, specially since my first Dyno run at hunter awd dyno was 130kw :(Was good to see some other skylines, majority were r32's even 1 running a 1jz, good day for along as I was there. A few common skyline problems managed to find themselves but I think faulty coils may be the cause of a low reading for a weapon of a 34,and rb20's with a little heat soak. Other Cars were a decent amount of v8 utes, a few Silvia boys and xr6t with 350kw boiling coolant , which was cool to see in the overflow. Big thanks to the boys, even allowing me to run shotgun to pump some more boost in :) hope some people got photos.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...