Jump to content
SAU Community

Recommended Posts

Hey guys ive got a jl audio w6v2 12 inch in a custom box made to the specs on the jl website for best performance i used to have a jl 500/1v2 powering it but dont have the amp anymore what other amp out there would people recomend i know the jl amp was amazing giving it was regulated for i didnt get any power loss from 14.4v to 10v but im wanting to try something not as expensive any suggestions?

btw this came up in my search has anyone ever heard of or used one of these before

http://www.onlinecarstereo.com/CarAudio/p_23322_Lanzar_VCT3000D.aspx

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/389091-need-a-new-amp-for-my-jl-w6v2/
Share on other sites

be warned about that company , I have first hand knowledge of " issues " pm for details to not defame in public

that lanzar amp is rubbish for subs, and failure rates high in hot climates for that model line. if you look at lanzar only look at Opti, Optimax, Pro models but some wont ship to OZ, dont forget amps cost just about 100 bucks to ship a big one from usa !!! lanzar in OZ can be extremely expensive for those models

I would look at Option Audio, jaycar, Boss upper end models, clarion, kenwood, pioneer . right now Option Audio is hard to beat price per watt , and a decent amp but beware of SAU user and eblow sellers of option audio , unauthorized in most cases !!!

dont over look Clarion, chris roger sells it off here, its decent

or Orion from Ministry of bass ask for simon off here

hagle

yeah i got some shipping qoutes for the laznar amps and there was a few sites which will deliver it for $87 on top is there a amp you can name out there that is 500wrms x1 at 4ohms with 12.5 power as most of the power they quote are at 14.4 clearly when they bench test them cause our cars dont run that much

hence why i love the jl audio amps they are regulated no power loss from voltage or ohms :)

just had a look at option audio they are around 300wrms at 4ohms prob on 14.4v for $250-$300 so im not sure about them when i can get the jl 500/1v2 for 410 delivered

Edited by jet2nv

your most likely running 2ohms on your sub so the power is doubled in most cases

A regulated amp like some of the Jl is ok for some cases but can hinder performance when the bass hits, the Option amps run a lot more power then the base JL in real world use , they like a lower ohm load then 4

the jaycar amp has even more power and was amp of the year a few years ago. notice its the same heatsink as the option only black ?

look at Hifionics , or Earthquake . as well

you can get a lanzar amp that walks all over even the highest powered amps in town, and would smoke that sub in 2 seconds flat for your price range , how much room do you want to loose, the new JL or Soundstream or rockford amps are smaller, ?

depends on how loud you like it , music type, budget , box design, car its in, etc to do it right ? unbiased

its a dual voice coil 4 ohm sub i used to have the jl1000/1 powering it and made 146db alot of people have used a 1000/1 and a 500/1 at the same time

im not talking about the new jl amps they are shit the older V2 amps are the ones im talking about

http://www.ebay.com....=item53eabb1c8e

shame is that power is from there bench test it wont be anywhere near that at 12.5v

thats not the series I would recommend like all brands you have cheap, mid, and high end thats the cheap end of the scale

If you made 146db in a single sealed box with 500watts on it or even 1000watts in a Skyline I'd love to see how it was measured, if I run your sub, amp combo and add in gain from the cabin it wouldnt come close to 146db , I had 2 bandpass15's ported into the car thru the ski tunnel in a VR4 Montecarlo with 5 alpine "unregulated model " amps that ran 146db when it crack the windshield from corner to corner. those db numbers normally come from hatchbacks from the shape boost

not coupes. ?

your sub only handles 600watts so remember JL wont warranty dead subs from burnout of coils ? they have a strict recommended power level and its not 1000watts

wihout knowing a lot more I can only chase my tail with ideas , why are you ditching the JL amp brand if its so good ? they cost a mint and arent the best for the money in my book. subs are decent sounding

I dont hate JL just think so many better choices to save money and still be happy.

I used JL subs in home theatre installs, good back for your buck on cheaper THX systems

since your so hung on numbers look for a CEA certified amp, with birth certificates showing power at voltages in that amp, most cost more then cheap models

http://www.ce.org/Standards/3108.asp

lanzar is on the list , my bass amp certificate shows it produces well over 5000watts at rated voltage at rated ohm load of 1ohm that runs 2 12" ..........7kw watts total

Edited by Carbon 34

was in a hatchback for testing and we tested it in a ute and cracked the hardlid im not ditching jl at all just a lil tight for funds atm and the w6 on jl website is rated at 1200rms at 4ohms then its voiding warranty i have a very long dicussion with the jl rep back a few years ago when i spent 15k on my whole system but now just a lil short for a new amp i see all the amps you have told me about but i cant see any with decent power ratings at 4ohms and at 12.5v most of there CLAIMED power is all bench tested

i just want something for around $250-$300 for now that willrun 500wrms at 12.5v on 4ohms

as the jl 500/1v2 is $410 delivered

was in a hatchback for testing and we tested it in a ute and cracked the hardlid im not ditching jl at all just a lil tight for funds atm and the w6 on jl website is rated at 1200rms at 4ohms then its voiding warranty i have a very long dicussion with the jl rep back a few years ago when i spent 15k on my whole system but now just a lil short for a new amp i see all the amps you have told me about but i cant see any with decent power ratings at 4ohms and at 12.5v most of there CLAIMED power is all bench tested

i just want something for around $250-$300 for now that willrun 500wrms at 12.5v on 4ohms

as the jl 500/1v2 is $410 delivered

I doubt that 100%..... but anyway

your speaker specs right off the JL site

W6v2 12-inch Subwoofer Driver (600 W, dual 4 Ω voice coils)

The 12W6v2 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.5 cu. ft. (42.5 l) ported enclosure.

warranty voided at >600watts per channel RMS

http://www.jlaudio.com/12w6v2-d4-car-audio-w6v2-subwoofer-drivers-92121

you sold yourself , buy the JL then its only 100 bucks diff ? I can give you hundreds of better choices but you come back to JL ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...