Jump to content
SAU Community

Recommended Posts

Set of KW variant 3 coil overs for a 2008 Infiniti - skyline v36 sports coupe.Brand new, not installed or used.

These are the best coil overs you can buy for this car.Will be selling the car, so decided to not fit them.Get them instantly & for less locally than from overseas.

$2,200 firm

$2,300+ from overseas with $200+ shipping & import taxes!

http://www.andysautosport.com/infiniti/2008_9999_g37/suspension/coilovers/full_coilover_systems/kw_suspension/kwss35285007.html

Located in melb.

Edited by pauls
Link to comment
https://www.sau.com.au/forums/topic/389475-v36-kw-variant-3-coil-overs/
Share on other sites

As per 370z.com

since we are doing the development of the SPC ARms for the G37 and 370z, we noticed that they are nearly Identical.

I can confirm they fit 370z and work well BUT difficult to adjust the compression on the fronts once they are on(I suggest an 8 or 9 compression setting on the front along with 9 rebound for starters.

I had these on my 350 and they were PERFECT but the the placement of that front compression adjustment is difficult to adjust.

State-of-the-art technology from motor sports for more performance on the road. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

http://www.kw-suspension.com/us/kw_variant_3.php

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...