Jump to content
SAU Community

Recommended Posts

Hey all have some parts sitting around after my rebuild.

A lot of parts good for any rb engine.

All parts came off working and in good condition

the list:

4x 265/35/18 nankang ns2 tyres, have camber wear on the fronts, tyres good for texi or skids $250

Standard BCNR33 radiator came off car when i bought it 107xxxkms $150

Std rb26 cam gears $35

Std GTR fuel pump good upgrade for rb20 $70

Std rb26 turbos no real shaft play evident in good condition just dirty from gasket leak $400

Std rb26 manifolds had plans to port for new setup but change my mind $70

Std BCNR33 dump pipes $50

Std Rb26 top feed injectors with resistor pack, good upgrade for rb20 $130

Std Rb26 water pump was put on car when 100000kms service was done only 25xxx kms on it still looks new $100

Std Rb26 AFMs with plugs $120

BCNR33 HICAS unit $100

Nismo top feed 600cc injectors only used for 10xxxkms, were cleaned and flow tested when bought off another forum member, work perfectly fine supports well over 330kw $650

BRAND NEW Tomei 87mm x 1.2mm head gaskey only test fitted to check clearances $270

Prefer NSW pick up, located sutherland shire

but can post at buyers expense

contact by PM on here thanks

post-71236-0-54912700-1327806937_thumb.jpgpost-71236-0-82659100-1327807326_thumb.jpgpost-71236-0-76591500-1327807315_thumb.jpgpost-71236-0-80426000-1327807301_thumb.jpgpost-71236-0-72386200-1327807284_thumb.jpgpost-71236-0-70669900-1327807272_thumb.jpgpost-71236-0-54912700-1327806937_thumb.jpgpost-71236-0-79044800-1327807357_thumb.jpgpost-71236-0-08414600-1327807374_thumb.jpgpost-71236-0-21700600-1327807387_thumb.jpgpost-71236-0-67286500-1327807402_thumb.jpgpost-71236-0-40953800-1327807421_thumb.jpgpost-71236-0-92721900-1327807447_thumb.jpgpost-71236-0-52610600-1327807474_thumb.jpgpost-71236-0-78018400-1327807484_thumb.jpg

post-71236-0-19477100-1327807495_thumb.jpg

post-71236-0-58205700-1327807342_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/389767-r33-gtr-parts-and-others/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...