Jump to content
SAU Community

Recommended Posts

Time to sell this one once and for all. (Dan, pls call me.)

side.jpg

R33 Gtr 1995 GTR in white. 45,000kms with books and receipts of all modifications. Previous power with N1 Turbo's and standard bottom end was [email protected]. With current setup and HKS 2530, I have yet to get a final tune.

Ran [email protected] when first arrived. Never ran at a higher boost.

HKS POWER FILTER KIT

HKS KANSAI 80EA/F Meter (Z32)

HKS GT2530 Turbine

HKS GT Manifold

NISMO Turbo Pipe

NISMO Front Pipe

TANABE Racing Medallion Muffler

HKS 1.2mm Metal Head Gasket

HKS Engine Gasket Kit

HKS Step 2 Camshaft (in264/out264)

HKS Cam Adjusters

TOMEI Valve Springs

NISMO N1 Pistons (0.5 larger)

NISMO FUEL PUMP

SARD 555cc Injectors

CUSCO Oil Catch Can

HKS EVC III Boost Controller

HKS Oil Cooler

HKS Remote Oil Filter Kit

HKS Intercooler

HKS Intercooler Piping

YOSHIO FACTORY Racing Radiator

CUSCO Radiator Cover

NISMO Thermostat

NISMO GMAX II Twin Plate Clutch

HKS Kansai Attessa Conroller

APEX’i Power FC & Handset

OHLINS Racing Suspension (Heigh/Damper)

NISMO Circuit Link & Bushes

NISMO Circuit Link Castor Rods

AVS Model 5 (19x10 F/R) 275/30/19

NISMO 320 Speedo Meter (white)

NISMO Center Meter (white)

HKS ETC

HKS Drag Controller

HKS CAMP with Junction Box

VSpec rear diff

APEX Boost Meter

APEX Exhaust Temp Meter

TRUST Pillar Mount

APEX ECV

CUSCO Strut brace

98 Series 2 Front Lip

N1 Intercooler Duct

N1 Bonnet Lip (Not fitted)

RECARO SPG II (2xRed) on top of the standard seats,

Apex'i REV/SPEED (blue version)

TRUST Grex gear knob

MOMO wheel

NISMO Oil cap

NISMO Rad cap

CUSCO Master Brake Stopper

CUSCO Steering Shaft Extension

HKS Type 0 T/Timer

Nismo EXEDY Twin Plate (extra for rebuilt)

BLITZ Blow Off Valve x 2 (Removed)

ALPINE Competition Head Unit

ALPINE 2 way Splits (Front/Rear)

ALPINE 6 Stack

PANASONIC Flat screen

Current offer is over 50 to someone is WA. IF you are a serious enquirer, call me on 041 340 8981 or PM me. Thanks.

rear.jpg

interior.jpg

Link to comment
https://www.sau.com.au/forums/topic/39001-r33-gtr-modified/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...