Jump to content
SAU Community

Recommended Posts

hi guys,

i gathered some interest in my last group buy at the end of 2009 and i was suppose to reopen again in 2010 but didnt have time due to my car being rebuilt and other issues.

so i am back again in 2012 to see if anyone is interested in some of the carbon parts for the R3X series skylines.

I have found a supplier in China that i visited the shop whilst i was there for a holiday and looked at their products first hand and they were of excellent quality!

The company is called PR Aero international and are based in Guangzhou, China.

All items are wet lay carbon or vacuum infused carbon, so its carbon layer on top and FRP base.

R34 stuff

* R34 GTT (suit stock front bar) radiator cooling panel ($110~)

* R34 GTR OEM rear bumper exhaust shroud ($70~)

* R34 GTR NISMO Z-Tune rear add ons ($150~)

* R34 GTT/GTR wind deflectors ($110~)

* R34 GT/GTT/GTR passenger headlight intake

* R34 GTR OEM wing blade

* R34 GTR JUN High wing stands

R33 stuff

* R33 B-Pillar Covers (like nismo ones) ($85~)

* R33 GTR rear spoiler end caps with "GTR" logo ($60~)

* R33 GTR OEM rear bumper exhaust shroud ($70~)

* R33 GTS/GTST S1 Garage defend style radiator cooling panel (will not fit GTR) ($150~)

* R33 fuse box cover

* R33 GTR OEM wing blade

* R33 GTS/GTST/GTR A-Pillar twin gauge pod suit 52/60mm ($140~)

R32 stuff

* R32 Dash mount double gauge pod Suit 52/60mm (not drilled, will have to be drilled with a holesaw to suit your gauges) ($130~)

* R32 GTR radiator cooling panel ($110~)

* R32 GTS/GTST/GTR wind deflectors ($110~)

* R32 GTS/GTST/GTR headlight intake

i will need a minimum of 15 people for the group buy to proceed, 2x people per item.

Some Pics:

R34

gttcooling.jpg

headlightf.jpg

shroudi.jpg

winddeflect.jpg

R33

endplate.jpg

fusebox.jpg

garagedefend1.jpg

garagedefend.jpg

R32

dashgauge.jpg

headlight1.jpg

headlight2.jpg

headlightg.jpg

radiatorplate1.jpg

radiatorplate.jpg

winddeflect1.jpg

winddeflect.jpg

Once interest is shown, i will confirm exact pricing.

the main shipment from China will come to me in Sydney and i will send it out to you via Aus Post.

Prices will be excluding shipping (calculated individually) based on your location around Australia. Will be sent via Australia Registered Post with tracking & insurance.

i can assure you that prices will be good compared to whats available on the market.

I will require 50% deposit to confirm your interest & purchase and to ensure that you are 100% and not a time waster, and the remaining 50% + shipping to be deposited to me once the item arrives.

Please feel free to ask for items that are not listed for the above models and ill see if they are available, for now lips/diffusers/sideskirts are too big and will blow out in shipping costs so will only be small items for this group buy. If this goes well, i will organise another group buy for larger items and will include gear for R35 GTR as well.

Start: 2/2/12

End: 24/2/12

Register your interest below!

Link to comment
https://www.sau.com.au/forums/topic/390222-carbon-goods-for-r32r33r34/
Share on other sites

  • Replies 221
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

interested in

* R33 B-Pillar Covers (like nismo ones) ($85~) - Please confirm if this just a fake CF sticker, the std ones or CF covering or full CF

* R33 GTR rear spoiler end caps with "GTR" logo ($60~) - Can these come without the GTR logo on them

* R33 GTR OEM rear bumper exhaust shroud ($70~)

* R33 fuse box cover - Pending Price

* R33 GTR OEM wing blade - Pending Price

Any sideskirts, front lips, headlight intake or canards available?

r33 series 2 gtst

Edited by 75coupe

Potentially interested in air guide for R34 depending on price. Can you get rear pods to suit GTT?

Cheers

sorry no rear pods to suit GTT. price will be confirmed once i get 2 ppl interested in it and the minimum ppl for group buy to proceed.

interested in

* R33 B-Pillar Covers (like nismo ones) ($85~) - Please confirm if this just a fake CF sticker, the std ones or CF covering or full CF

* R33 GTR rear spoiler end caps with "GTR" logo ($60~) - Can these come without the GTR logo on them

* R33 GTR OEM rear bumper exhaust shroud ($70~)

* R33 fuse box cover - Pending Price

* R33 GTR OEM wing blade - Pending Price

Any sideskirts, front lips, headlight intake or canards available?

r33 series 2 gtst

- confirmed as replacment according to source & pics but can easily be stuck on with 3m double sided tape.

- end caps come with GTR logo only.

- will get back to you on pricing of the fuse box & wing blade once there is more interest.

- there is a GTR headlight intake (are headlights the same between GTR & GTS/GTST S1 & S2? & canards (suit GTR only)

interested in R34 GTT (suit stock front bar) radiator cooling panel ($110~)

but would it fit the nismo front kit ?

- stock bar only, what is the difference between stock bar & nismo/altia bar, can someone post up a pic?

* R34 GTR OEM wing blade

* R34 GTR JUN High wing stands

R33 GTR Wind deflectors/weather shield?

If yes, how are they attached?

- will get back to you on pricing once there is another person interested.

- they need to be attached by 3M double sided tape.

Guys, please note i can only confirm pricing if there are at least 10 ppl with each person interested in two of the same items.

pretty sure u can get all of those r33 parts off ebay pretty cheap.

need some one to make complete r33 dash kits that dont cost $1k like the superior auto ones

Only one way to see.

Price.

I don't understand why you need people interested to post price.

Being interested then seeing price and no longer being interested is useless.

Post prices, then find the interest if any

Ebay prices are not cheaper than this, i've already checked otherwise i wouldn't waste my time.

apparently 75COUPE knows another supplier in China who can get them cheaper. will await for his reply and for him to start his own group buy so we all can save more money, isnt that what everyone wants right?

Aren't the ztune add ons, rear pods :S?

Yes but for GTR only, the guy asked for GTT in case you've missed that part.

no these are good prices, and unfortunately I dont have the time to organise a group buy like this, so well done Dori34 for doing this, your welcome to have my contact if you need it.

sent you a PM scott,

already been in touch with your supplier, and he has quoted me more than what i've listed above on most items( and they are without group buy discount as well).

come on guys, keep the interest coming.

group buy can proceed with 10 people or less but of course prices will not be as cheap as it would with 15+ people,

(prob saving anywhere from $10-$25 depending on item)

To whoever is interested, please send me a PM.

MsR; sorry no bonnets in this group buy.

list of ppl that have shown interest

AAARGH 33 - R33 B pillar cover& fuse box cover

75coupe - R33 B pillar cover, fuse box cover, rear spoiler end caps, wing blade

sonnyQ - r34 radiator cooling panel

GT-T 1998 - r34 radiator cooling panel

Owgasm - R34 GTR wing blade, wing stands, r33 wind deflectors

rysith - R34 exhaust shroud

ztuned - r34 gtr wing blade

pewpew - r34 gtr wing blade

eatme - r33 gtr wing blade

sinistagtr - r34 gtr wing blade

dori34 - R34 wind deflectors, exhaust shroud, cooling panel, jun wing stands, r34 gtr exhaust shroud, r34 gtr passenger headlight intake

if there are any thing i've missed, please let me know.

need 1 more person for R34 wind deflectors and this group buy is going ahead if all the above is interested after price confirmation.

will have prices on wing blades & wing stands by tomorrow.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...