Jump to content
SAU Community

Abs

66yostagea

By 66yostagea,
in Four Door Family & Wagoneers

 Share

Recommended Posts

66yostagea Grand Master

66yostagea

Posted
Posted

As I have said before the ABS light is on permanently in the 25G.Also the hand brake has been disconnected because it would not release.Ithas been this way for a couple of months.

Today after about 2k of driving, after stopping and turning key off, heard a strange buzzing coming from under the hood. On looking the buzz was found to be coming from the ABS unit. Turned the key to the on position and it stopped. Turned off and still stopped but then came on again. Its at it all the time even with engine running. It stops if I pull the outer 30 amp in the box under the hood. Have checked the in car fuse and it's OK. System has Castrol DOT4 fluid.

Any assistance will be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/390390-abs/
Share on other sites
66yostagea Grand Master

66yostagea

Posted
  • Author
Posted (edited)

I think the only way we are going to debug this is if I come past and plug the diagun into the car. is it visually throwing codes at all?

No the only thing I know is the ABS light has been on for yonks, before I did the upgrade. The buzzing arrived uninvited.Since pulling the fuses, front brakes can be locked. Pardon my ignorance but are there sensors on the rears of a RWD, or 4WD for that matter.

Edited by 66yostagea
Link to comment
https://www.sau.com.au/forums/topic/390390-abs/#findComment-6218812
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • MBS206
      boost source Size Garrett gt28 gen2

      By MBS206 · Posted

      Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...