Jump to content
SAU Community

Recommended Posts

what's the offset? I'm running 18x9 +26 on my 33 gtst

shit picture but:

5131155458_3514f9d666_b.jpg

trying to find a full side-on

ok album here

http://imgur.com/a/kasZy

(ignore busted front bar and massive ding in rim in 2nd pic)

offset 42..btw nice wheels :)

Link to comment
https://www.sau.com.au/forums/topic/390610-18-x75-jj/#findComment-6220081
Share on other sites

hi guys,

i intend to fix 18"x7.5jj to my r33 gts,but wondered if anyone here has done this b4.need to know what they look like if fixed to the car..any picture most welcome..tq

cheers

With an offset of +42 these wheels will sit inside the wheel arches a fair bit

Like barnoon says, spacers might be needed in order for the wheels to fill out the guards.

Personally, I'd be looking for something wider with a lower offset

Link to comment
https://www.sau.com.au/forums/topic/390610-18-x75-jj/#findComment-6225131
Share on other sites

With an offset of +42 these wheels will sit inside the wheel arches a fair bit

Like barnoon says, spacers might be needed in order for the wheels to fill out the guards.

Personally, I'd be looking for something wider with a lower offset

i would have thought so too..perhaps fix something like this >>> 18 x 8.5 +30, 18 x 9.5 +38

thankz to barnoon n u for the suggestion..

Link to comment
https://www.sau.com.au/forums/topic/390610-18-x75-jj/#findComment-6225162
Share on other sites

Like Cass and barnoon have stated, that's a fair way off ideal. An offset of +42 is something you'd find on a FWD car, so aim for something around +25 too +35 depending on the width of the wheel.

There are heaps of offset calculators on different wheel websites. There are even iPhone/iPod and iPad apps for it.

Link to comment
https://www.sau.com.au/forums/topic/390610-18-x75-jj/#findComment-6227126
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
    • Haha I just finished the last season of TPB: Jail last month. I'm happy they're still pumping out episodes. 
×
×
  • Create New...