Jump to content
SAU Community

Recommended Posts

Fire sale

Haltech e11 v2 with 3bar map sensor, usb cable, shift light, near new - $1500

Rb25det Gearbox, rebuilt - $1500

Blitz ID3 boost controller - $400

R32 Gtst 5 stud full setup, race spec rotors, new pads - $800

... Genuine greddy rb25 intake with genuines q45 throttle body - $1000

Rb25det 6boost with tial 44mm waste gate - NEW - $1200

Rb25/20 Tomei 256 camshafts with Tomei gears - $1000

Brand new coilovers to suit S13/cef/laurel - $600 - go gangster low

Adjustable camber, castor, toe, traction arms, all new - $80 pair

Front adjustable LCA to suit nissan - $300

Bee*r limiter - $200 (may keep)

ORC twin plate clutch to suit RB push type - $700 (recently reco'd)

Reco'd Rb25det head new everything - $700

Cometic 1.2mm rb25 head gasket - $300

R32 GTR front suits. good nick, drivers side has slightly sloppy bolster - $350

Brand new v8 supercar spec tailshaft to suit rb25 box in cef - $550

Cef roller, can either be with 5 stud, all arms, or 4 stud stock. lots of kits and lots of spares - $3000

Blitz RARE BLM (black light meter) carbon faced water temp tand boost gauges.... cost my ex $350 a guage... sell for $500 pair.. mint conditions

Apexi turbo time, pen type, black new in box - $50

Full surge tank setup with new bosch 040 and 044 pumps

Denso top feed 800cc injectors - $700

Lots more, will update regularly

Brisbane Southside, Pm me, Has to go to fund new project

Pics on request, serious buyers with cash ONLY, not looking to swap for a vl.

Edited by Ceffboxx
Link to comment
https://www.sau.com.au/forums/topic/391000-massive-high-end-fire-sale/
Share on other sites

Hey, assume the rb25det is rear wheel drive box out of an r33gtt that I can bolt onto an rb26 rear wheel drive setup.

What was reco'd, why & what would you settle for it?

In melb, can you organise shipping?

Cheers,

Paul

sorry, yourself not included. I work to much and didnt see your message.

Cams, intake and 6boost are on my motor, which is at the workshop so sale on those items is on hold until i have them in my hands.

But to those who offer me $300 for $1450 cams.... which is new, and they are new... Dreamer.

Well let me know if you think I could have the plenum and throttle body by about the 15th of March at the latest as long as it comes with all the bolts, otherwise I'll just buy a brand new one. Let me know even if it's later than that incase my event gets postponed, then I'll wait. Thanks.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...