Jump to content
SAU Community

Gtr Injectors Upgrade Kit With Fuel Rail, Fuel Reg, Resistor Pack, Connectors And Adaptors $600 Sa


Recommended Posts

I have a GTR Injector upgrade kit with everything needed to get going for an rb25det, probably also fit rb20dets quite easily as well.

Comes with:

6x GTR 440cc Injectors with alloy adaptors for rb25det fuel rail

Resistor Pack

Alloy Fuel Rail with spacers

MagnaFlow Fuel regulator with bracket, speedflow fittings and hoses.

Loom connectors and wires for resistor pack and injectors.

This is everything you need to get GTR injectors on your rb25det, all you will need is to wire in the loom and get a tune! No stuffing around, 1 purchase and 1 set of shipping with everything you need in working order. Will support up to 270kw with the injectors alone, above 300kw by adjusting the fuel regulator.

Have removed these to install 740cc injectors, they are in perfect working order and were pulled off the car tonight.

$600 posted to your door anywhere in Australia.

Contact me via PM or call me on 0423 277 771

img20120211223554.jpg

img20120211223604.jpg

What it looks like installed on your car:

28708729.png[

Comes with the bracket, speedflow fittings and the hoses.

Edited by Rolls
  • 2 weeks later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...