Jump to content
SAU Community

Recommended Posts

Tuning..

Tune 1:

115rwkw Stock.

125rwkw Fuel Pressure Bleed.

Tune 2:

152rwkw Exhaust, Boost Bleed to 12psi, Fuel Pressure Bleed & ~20degrees Timing.

Tune 3:

156rwkw Exhaust, Boost Bleed to 15psi (12psi Drop over 5500rpm), Fuel Pressure Bleed & ~25degrees Timing.

Really it had a bit to much Timing esp. If you got a slightly bad batch of fuel or a Hot Day.

Tune 4:

164rwkw Exhaust, Blitz SBC-iD @ 15psi, Fuel Pressure Bleed & ~17degrees Timing. Set it up a little safer this time.

Tim @ RPM seems to think I could have made 170rwkw with a better flowing exhaust BUT Better Flowing Exhaust = LOUD..

I really am Tired of Loud Exhausts on my Cars :)

So I'll be happy to trade the 6rwkw for a quieter Exhaust.

Looking at the Exhaust it shouldn't be to restrictive as it is has a straight through exhaust but the Dump Pipe I think could be a little bit better.

We are going to drop the exhaust off one day and give it a dyno run just to see what she makes at the rears.

Well.. Thats it for the Std. Turbo..

Now for the New Turbo.. I'll be looking at a HKS 2530 I think, Thats IF a BIG IF I can Find One..

Link to comment
https://www.sau.com.au/forums/topic/3916-latest-dyno-run-1-bar/
Share on other sites

The AF isn't to bad she leans out ever so slightly in the mid but it is still pretty safe.

Up top she still runs slightly rich but thats to be safe.

But only a ECU re-map will fix that.. Not until the Turbo But..

I'm going to slap a new set of plugs in these Old Coppers I image are getting pretty tired now.

BCPR6EIX (0.8mm) is the part No that I'm looking at..

Is that what you are running Clint?

EDIT: God I've spent some money....

It will be up around the 5k mark with the new turbo.

Oh well to get 200rwkw with the Old VS 5ltr I had I was going to have to spend 7k on a supercharger which then I would have Major problems with Insurance.

Im running NGK iridiums, i may change these when I do my other mods but at the moment they are doing good after being in for a year. I ran iridiums as the go-kart motors we race are succeptable to fouling plugs and running iridiums we dont foul them so i thought id run them in the skyline.

You should be able to find a 2530, just save some cash and keep looking, you will find one just hoprfully for the right price.

Clint..

I had a power run with the car running stock timing and stock fuel pressure it made 150rwkw with the bigger fuel pump @ 15psi at ~6500-7000rpm

That Part No. is supposed to be for the Iridiums..

I got the Part No off the forum :)

Hey Good work Joel the car will benefit so much with the new turbo once u find one what happened to the "40" scared of a bit of lag?

Will be good to see the Next Dyno run with the turbo on altho i assume u will be backing that timing right off +20 is a heck of alot of advance

cheers

Nope havn't run a 1/4 time yet. :)

When I launch at 4200rpm and slip the clutch to launch really hard with not much wheel spin some times in second the clutch starts slipping..

These Chepo' Simex 225 50's seem to really hook up, the wet is a different story but :D.

So a clutch maybe in order with a new turbo.. Even though this is a new clutch..

Thanx Jeff... I'm looking at a little cheaper than that :D

Macka.. I am a little scared of the 40's Lag.. + I might start having troubles with the drive line and the stock wheels that I'm running.

Uni next year so i don't want to be forking out $200+ for a tyre :)

Simex's at the moment are $139 each.

I really want to do something with the stock Air box.. Maybe some how adapt a different airbox that looks stock but doesn't have the bell mouth. I know a VS 5ltr Air box flows really well but it is kinda the wrong shape..

I should replace my stock air filter soon also.

hrmm..

wait amin..........stock airbox?

as per your signature?

Cmon joel rip it all out.......u need the bellmouth for the air to circulate.

1 bit of ally and your hot air intake is back to a cold air intake mate :-)

Did u read the fight over hks 2530s and 40s on SDU?

quite interesting although they were talking about twins for gtrs still quite relavent

Apparently th HKS GT2530's make around 220rwkw with a tuned ecu on a RB20DET using around 1.1bar on 98 RON Fuel.

Then Adj. Cam Gears should allow for a little more improvement. ~230rwkw:) Full boost around 3700rpm.. Approx

THE HKS 2530 is supposed to be the perfect balance between not to much lag on the rb20det..

Quoting Tilbrooks here. :)

Anyway the GT2540 i'm not to sure about. You maybe looking at say full boost by around 4200rpm or maybe a little more but the top end potential would be awesome with a set of adj cam gears.

250rwkw :D

I'm not really sure i'm kind of guestimating. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
×
×
  • Create New...