Jump to content
SAU Community

Recommended Posts

I think pictures speak for them selves.

Car in front wasn't watching.. Broke late..

I just happened to look down to move my floor mat for a fraction of a second when I hear squeeling..

Next second I'm squeeling and bang, happened too quickly to even unlock the brakes and re-apply. :D

Some how the FMIC didn't spring a leak.. *YET*

It was a young P plater in a little ol' white ~82 Mazda 626 that I hit.

His rear bumper still looked ok apart from the chrome stripping that had been squashed. :(

But thats the way it goes.. I should have left enough room up front to stop in time under all circumstances. Strange thing is only a couple of months ago I woke up after having dream that I looked up and hit a white car up the arse. *plays spooky music*

Fark.

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/
Share on other sites

I'm considering claiming insurance as the excess is 1k.

I'll find out first what they want to spray everything up.

I'll say I will need another radiator support panel bit (thats if its like the ol' Holdens how it bolts on and off) another bonnet. the two guards are fine.. a new bumper and a new bumper support bar. + 2 headlights. blinkers are fine.. not a scratch on them

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/#findComment-795217
Share on other sites

Joel, I have just put a GTR bonnet on my car, and have my original bonnet. I am still deciding on wether to keep it as a spare in case I end up dinging mine or getting rid of it, if you are keen let me know and I will have a think about it

Bad luck on the accident,

Chris

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/#findComment-795343
Share on other sites

Cheerz Chris.

I think I am going to end up claiming as just for parts Here's what I have

2 x Headlights - $370

Radiator Support - $165

Radiator - $210 (not really needed but the fan did touch the top of the radiator)

Shroud - $75

Bonnet - $275

Front Bumper & Support Bar - $385

Both blinkers and guards havn't been touched.

Thats $1480 already without labour for welding the radiator support in + paint etc.

My excess is 1k all up inc. under 25 excess. Thank god I changed insurance company's and didn't go with Justcars or famous who charge 2k as an excess.

There goes my Rating 1 65% NCB :D

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/#findComment-795578
Share on other sites

:D shxt happen, i blow the head gasket of it :Bang: , then the workshop discover a hole in a piston!

so now i am putting another 1100 engine in it plus manual transmission. (used to be very rare semi auto and 1000cc)

and drop $1500 out of my pocket :)

everything happen when i selling/sold my car. got nothing to drive atm so staying at home everyday...

Try to take a bus to uni, and i went to the wrong direction end up going to city!

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/#findComment-796134
Share on other sites

My old man had an original mini cooper 's'. Used to run 14:1 comp. Easily outran the old valiant cop car at Strathalbyn. Had to run the thing on a methanol mix and used to do big ends on a regular basis by revin it to hard. Awesome cars but, When i was in malaysia i found they brought big money, $30k + for a real mint one, the people over there love them.

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/#findComment-796324
Share on other sites

Joel, think about how much claiming on insurance really costs

$1000 excess

65% NCB (say around another $500 to $1000)

then, it takes you another 5 years to get back to rating one, IF you can get insurance, so for the next five years it will probably cost you near enough to another 1-2K.

Not really that cheap - unless you have NCB protection.

If I remeber correctly MattR couldnt get insurance after his R32 was written off, different I know, but it might be worth checking to make sure you will be able to get re-insured again when the renewal is due.

For all those parts, have you tried seeing if you can get a cash discount;) always brings prices down for me, also have you tried the more obscure jap wreckers?

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/#findComment-796545
Share on other sites

yeah add up the fact that next year the premium will go up and wont drop for a few years, you should be able to get parts for a lot better than that, get the phone book out.

I only just sold my bonnet for $100 too, have a radiator you can have real cheap dont know its condition though, and have the shroud as well, maybe more stuff just need to go for a hunt

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/#findComment-796565
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...