Jump to content
SAU Community

Bored at school (mod: and Ash havin a whinge as per usual)


Recommended Posts

hey guys

sitting here in 3rd period with no teacher again.

did you guys hear or see the yellow r33 in home and away.

the plates where DEDSXE they where nsw plates.

my sis called me int he moment it came on.

just seeing if any of yas saw it

bye :Bang:

mmm poor you guys i am in yr 11 in the last 2 days i have had 7 spares from 12 which is quite good for me.

yeh our school has blocked about ever car site i have been to besides sau.

they even blocked full boost becasue they had a chick in a bikini for one of there front page pics

no spares? :D ... i have 3 spares per week, as most do. there's a few girls doing an out of school subject (horse studies ... ahahahahahhahaha) and they get 10 spares a week, which means they don't have to come to school on wednesdays.

GTSR22- are all those spares because of teachers being away ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • A HICAS fault really should not cause the engine to go into limp mode. These cars are so old that the systems barely talk to one another. The thump might be the lockoff solenoid valve for the HICAS (the safety valve) getting closed, to lock the rear wheels "straight". I say "straight", because when my HICAS used to shit itself before I took off and nuked it from orbit, it would lock up with the rear wheels wildy non-straight and you'd need 45° of steering wheel to drive straight. Take off and nuke it from orbit. First step is to pull the smaller of the two plugs out of the HICAS CU. See if it stops misbehaving. You can also (whilst leaving it plugged in) try to get the HICAS CU into diagnostic mode by doing the pedal dance, or by connecting a CONSULT capable diagnostic reader into the car and seeing what it has to say for itself. Can't do either of these with it unplugged though. 1st gen HICAS is a ballache. I would do a complete delete. I did do a complete delete.
    • Ah. I dunno why, but I skim read your earlier post and thought the manual switch was to force it on, not force it off. I'd be tempted to have both. So, your two in series, and another in parallel with those. Or, a master arm switch, followed by the manual force on and the thermo in parallel. 6 and 2 3s.  
    • Yeah been doing it in an x shape. Do you reckon it's worth putting guide coat early where the filler isn't sanded down completely smooth? Reason I ask is because as I'm sanding it one part might be level which I don't need to sand anymore but the other part might be high so I can just focus on that instead of sanding across the whole repair area. I wonder if the putty is too thin, though the area is almost completely smooth before I do it as I've already put filler prior.
    • Just 2, and inline. One switch temp related other switch driver controlled.   I'm nearly in my head back to Arduino land for it...
×
×
  • Create New...