Jump to content
SAU Community

R33 Rb25 Stock Turbo

nthside_skyline

By nthside_skyline,
in Classifieds

 Share

Recommended Posts

nthside_skyline Enthusiast

nthside_skyline

Posted
Posted (edited)

Hey Everyone

I have a stock R33 Turbo that I took off mine thinking that it was blowing smoke and it turned out to be my valve stem seals, when it was removed the mechanic told me he didnt think there was anything wrong with the turbo because it had minimal shaft play in either direction including in and out.

I still went ahead with putting the other one I bought on the car because at the time I didnt know my valve stem seals were shot. As I pulled out of the mechanics garage the car started to smoke again and the mechanic said it was the valve stem seals and not the turbo.

So now I am left with a perfectly good stock Turbo I need to get rid of to fix my Valve Stem Seals.

So As it reads its a stock standard turbo out of my S1 R33

I am wanting $250 for it, let me know if anyone is interested.

The pics are as it came off the car with nothing washed to make it look like a brand new turbo.

Turbo located on the North Side near Kallangur

Cheers

post-76478-0-54140800-1329987655_thumb.jpg

post-76478-0-91390600-1329987856_thumb.jpg

post-76478-0-31126600-1329987928_thumb.jpg

Edited by nthside_skyline
Link to comment
https://www.sau.com.au/forums/topic/392777-r33-rb25-stock-turbo/
Share on other sites
  • 2 weeks later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Duncan
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Duncan · Posted

      Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...