Jump to content
SAU Community

Recommended Posts

When i try to start the GTR it turns over fine, but coughs to life, and then runs rough and rpm keeps falling until it stalls - which takes about 10 seconds. Throttle doesn't help to raise the revs. What should i check first? I was thinking maybe fuel pump, but its only about 3 years old (sard) so I hope it hasn't died already.

Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/392843-starting-issue/
Share on other sites

Update: no sensor warnings via consult

The car was running fine before I parked it, then dead when i came to start it again, so I think spark plugs are unlikely. I'll try to find a vac leak. Needle in a haystack..... cant use the aerostart trick because it doesnt run long enough.

Link to comment
https://www.sau.com.au/forums/topic/392843-starting-issue/#findComment-6249575
Share on other sites

Spark plugs unlikely? Sounds EXACTLY like my car after spark plugs were fitted in about a week earlier. Fresh plugs went in. Drove home from work at night. Parked the car. Next day tried to start it up the car coughed and spluttered, started and died then would never fire up. New plugs, started up just fine. Plugs got fouled.

If you've failed to start the car a couple times, every time after that you are wetting your plugs and pretty much f**king them up. Try new plugs, if it doesn't fire up, then try the fuel pump test. Remove the hose from the fuel pump to the rail, put it into a bucket and check its flow for a couple of seconds. If its moving fuel, and you say throttle doesn't help it start, I'm going to say spark related.

I don't know how you would develop a vacuum leak after parking the car but if you did have one, the car will start and just idle rough with alot of black smoke. Ive had minor and major leaks and each time the car does start, its just rough as ass.

Link to comment
https://www.sau.com.au/forums/topic/392843-starting-issue/#findComment-6249664
Share on other sites

Mate you didn't put petrol in it just prior to the problem? I had a similar thing about 4yrs ago n it ended up that the fuel i put in the night before from a servo that "apparently" didn't sell much v'power (shell servo obviously) let their under ground tanks run so low i got so much rust with my v'power i needed to replace all injectors, fuel filter, fuel pump, remove the Farking tank to flush it, only reason i didnt burn the servo to the ground is the owner paid me $1950 for repairs...he insisted i provided legit tax invoice and information of the w'shop that did the repairs so he could call and verify. Which was easy coz i had a workshop :whistling: hope yours aint same issue hey... I'd suggest you pull plugs out just to determine if its getting fuel, and if theyre fouled up you more than likely have a vacuum leak sumwere thats causing it to have the excess fuel pressure. Does billow black smoke or smell fuely when it does inda run?

Link to comment
https://www.sau.com.au/forums/topic/392843-starting-issue/#findComment-6249688
Share on other sites

Well i had put in a tank of United 100 as my car seemed to like their 98 a bit more than other 98s, and the station i went to didnt sell the 98 anymore. I haven't smelt fuel. I guess its worth checking how the plugs look as that's pretty easy and will let me know if they're wet with fuel or not. They're iridiums so should be more resistant to fouling than coppers.

The service manual points to fuel pump, so i'll see if supercrap have a pressure tester and get a new filter while i'm at it.

Thanks guys - keep the ideas coming.

Link to comment
https://www.sau.com.au/forums/topic/392843-starting-issue/#findComment-6249771
Share on other sites

Check if your plugs are getting wet, are the injectors pulsing? Remove a spark plug and touch it to the head, can you see a spark arc? Need to know if you are lacking fuel or spark. My money is still on plugs. fould plugs.won't look any different to working plugs. You were getting coughing and now it's just turning over without any coughing. Would indicate either no fuel flow at all (unlikely), or no spark.

Link to comment
https://www.sau.com.au/forums/topic/392843-starting-issue/#findComment-6251240
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...