Jump to content
SAU Community

Recommended Posts

Name's Andres, from the states, texas to be exact. I drive a 98 s14, yesss, left hand drive, and i like it that way.. I just did a rb25 swap on it and have been gathering a bunch of info from this site, so i figure i say "hi" and maybe stick around, oh and to thank you for such a great site. I've been having a few issues with the rb, recently had to turn down the boost from 10 to stock because i bealive i was hitting rich n retard, took me a while to figured that out, but since the problem is mostly gone i believe that's what it was, guess this crappy ecu's dont like very high flowing upgrades. Im still having a few issues with my afr's, still gotta check my afm and get a new o2 sensor.

All in all so far i like this swap but still got to get it as perfect and reliable as possible 'cause this car's my dd and takes me everywhere. I also have all the a/c hooked up and charged, just need to figure a few cables out

On with some pix and mod list, everything has been done by me including wiring and brakets. Car's sitting about an 1 1/2" lower now

98 240sx

85mm apexi exhaust

am performance elbow/downpipe (originally screamer pipe, but re-routed it into the exhaust, wayy to loud for my taste..)

hollowed out cat

apexi power intake filter

cheap ebay vertical flow fmic

recirculated greddy type s bov

shaftmasters 1 piece aluminum driveshaft

aem wideband

bkr6e to .028

walbro 255

d2 coilovers

z32 brakes all around, hps pads upfront

seibon cf hood

z33 base rims

IMG_20120107_163243.jpg

1327620223099.jpg

1327620278426.jpg

IMG_20120107_163333.jpg

IMG_20120107_163315.jpg

IMG_20120119_221417-1-1.jpg

1327620311913.jpg

IMG_20120204_183007.jpg

IMG_20120211_154801.jpg

Edited by andres14oj
Link to comment
https://www.sau.com.au/forums/topic/392865-newbie-reporting/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...