Jump to content
SAU Community

Recommended Posts

Sparco Rev seats BRAND NEW with sideplates, rails and harness. These seats are the same as Sparco EVO’s, however,they are slightly narrower.

These seats were purchased for $3000 brandnew for a project that never took off and have been in my shed wrapped inplastic ever since.

Seats, side plates and rails available alltogether for $700ea

Harnesses sold separately for $150ea

I have two seats available each with side plates, rails and matchingharnesses.

No swaps, pick up only.

post-53617-0-39310400-1330348875_thumb.jpg

post-53617-0-72839800-1330348902_thumb.jpg

post-53617-0-68077300-1330348928_thumb.jpg

post-53617-0-37215100-1330348949_thumb.jpg

post-53617-0-60444200-1330348974_thumb.jpg

post-53617-0-38364400-1330348999_thumb.jpg

post-53617-0-26089600-1330349023_thumb.jpg

5 speed WRX Dog box PPG gear set withbillit selector forks and reverse lock out. Gearbox is in good condition andhas only done 3000km’s. Gearbox was taken apart to show condition of gears (seephotos). This gear set was purchased for $11,500 brand new. Will come with allthe spare parts that we currently have from the other WRX gearboxes at no extra cost. DCCD rear end and two spare standard WRX ends as well as a spare gear box.

Price - $4,500 (non-negotiable)

No swapping, pick up only.

post-53617-0-98208200-1330349125_thumb.jpg

post-53617-0-63988000-1330349462_thumb.jpg

post-53617-0-37264800-1330349522_thumb.jpg

post-53617-0-65555400-1330349560_thumb.jpg

Built RB25DET yet to be run. This enginehas been machined and built with fully forged internals. Re-built the enginefor a project that ran out of funding and has been in my shed wrapped inplastic waiting to go to a good home. Engine comes with the following brand newitems:

  • Eagle Rods (fitted)
  • King bearings - Main bearing & Big endbearings (fitted)
  • CP Piston & Rings (fitted)
  • JUN crank collar (fitted)
  • ARP Stud Kits (fitted)
  • HKS Ex Cam Gear
  • Cometic MLS Head Gasket – 1.2mm
  • Ported head – has no lifters
  • 3 angle valve job
  • N1 water pump
  • N1 oil pump

All parts that are not fitted, still comewith the engine as separate parts.

Price - $4,500 for engine and all parts

Please note that the turbo kit seen on the engine is sold separately. Please see my posts to view details.

No swaps, pick up only.

post-53617-0-23171000-1330350135_thumb.jpg

post-53617-0-91831900-1330350174_thumb.jpg

post-53617-0-70820200-1330350210_thumb.jpg

post-53617-0-60443400-1330350247_thumb.jpg

post-53617-0-51560000-1330350285_thumb.jpg

post-53617-0-86728800-1330350328_thumb.jpg

post-53617-0-27011600-1330350370_thumb.jpg

Brand new HKS turbo kit yet to be run. Waspart of an engine build that ran out of funding and has been un-used, wrappedin plastic ever since. Full turbo kit details are:

HKS 3037S turbo AR .87, 48T, GT25 Exhaustflange - $2,500

HKS Manifold - $1,100

HKS 50mm wastegate - $900

Happy to split up kit and sellindividually.

No swaps.

post-53617-0-88049300-1330350625_thumb.jpg

post-53617-0-84443200-1330350634_thumb.jpg

post-53617-0-36190500-1330350642_thumb.jpg

post-53617-0-73974100-1330350667_thumb.jpg

post-53617-0-47484600-1330350691_thumb.jpg

post-53617-0-91106300-1330350696_thumb.jpg

post-53617-0-61903800-1330350724_thumb.jpg

I have no idea what you just did or wat any of that means but ok :)

Threads merged.

Read the forum rules before mass-spamming with singular threads in the future.

Brand new HKS turbo kit yet to be run. Waspart of an engine build that ran out of funding and has been un-used, wrappedin plastic ever since. Full turbo kit details are:

HKS 3037S turbo AR .87, 48T, GT25 Exhaustflange - $2,500

HKS Manifold - $1,100

HKS 50mm wastegate - $900

Happy to split up kit and sellindividually.

No swaps.

This is an RB25det Kit forgot to mention that.

I also have my Nismo gt lsd complete in the housing done less than 1000kms $1000 firm can pick up from Ipswich or pickup from my house in Brisbane.

post-53617-0-74473600-1330750634_thumb.jpg

post-53617-0-23158400-1330750657_thumb.jpg

post-53617-0-86398100-1330750682_thumb.jpg

post-53617-0-01115600-1330750706_thumb.jpg

post-53617-0-22489200-1330750729_thumb.jpg

post-53617-0-75639900-1330750752_thumb.jpg

post-53617-0-42642800-1330750770_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...