Jump to content
SAU Community

Recommended Posts

Sparco Rev seats BRAND NEW with sideplates, rails and harness. These seats are the same as Sparco EVO’s, however,they are slightly narrower.

These seats were purchased for $3000 brandnew for a project that never took off and have been in my shed wrapped inplastic ever since.

Seats, side plates and rails available alltogether for $700ea

Harnesses sold separately for $150ea

I have two seats available each with side plates, rails and matchingharnesses.

No swaps, pick up only.

post-53617-0-39310400-1330348875_thumb.jpg

post-53617-0-72839800-1330348902_thumb.jpg

post-53617-0-68077300-1330348928_thumb.jpg

post-53617-0-37215100-1330348949_thumb.jpg

post-53617-0-60444200-1330348974_thumb.jpg

post-53617-0-38364400-1330348999_thumb.jpg

post-53617-0-26089600-1330349023_thumb.jpg

5 speed WRX Dog box PPG gear set withbillit selector forks and reverse lock out. Gearbox is in good condition andhas only done 3000km’s. Gearbox was taken apart to show condition of gears (seephotos). This gear set was purchased for $11,500 brand new. Will come with allthe spare parts that we currently have from the other WRX gearboxes at no extra cost. DCCD rear end and two spare standard WRX ends as well as a spare gear box.

Price - $4,500 (non-negotiable)

No swapping, pick up only.

post-53617-0-98208200-1330349125_thumb.jpg

post-53617-0-63988000-1330349462_thumb.jpg

post-53617-0-37264800-1330349522_thumb.jpg

post-53617-0-65555400-1330349560_thumb.jpg

Built RB25DET yet to be run. This enginehas been machined and built with fully forged internals. Re-built the enginefor a project that ran out of funding and has been in my shed wrapped inplastic waiting to go to a good home. Engine comes with the following brand newitems:

  • Eagle Rods (fitted)
  • King bearings - Main bearing & Big endbearings (fitted)
  • CP Piston & Rings (fitted)
  • JUN crank collar (fitted)
  • ARP Stud Kits (fitted)
  • HKS Ex Cam Gear
  • Cometic MLS Head Gasket – 1.2mm
  • Ported head – has no lifters
  • 3 angle valve job
  • N1 water pump
  • N1 oil pump

All parts that are not fitted, still comewith the engine as separate parts.

Price - $4,500 for engine and all parts

Please note that the turbo kit seen on the engine is sold separately. Please see my posts to view details.

No swaps, pick up only.

post-53617-0-23171000-1330350135_thumb.jpg

post-53617-0-91831900-1330350174_thumb.jpg

post-53617-0-70820200-1330350210_thumb.jpg

post-53617-0-60443400-1330350247_thumb.jpg

post-53617-0-51560000-1330350285_thumb.jpg

post-53617-0-86728800-1330350328_thumb.jpg

post-53617-0-27011600-1330350370_thumb.jpg

Brand new HKS turbo kit yet to be run. Waspart of an engine build that ran out of funding and has been un-used, wrappedin plastic ever since. Full turbo kit details are:

HKS 3037S turbo AR .87, 48T, GT25 Exhaustflange - $2,500

HKS Manifold - $1,100

HKS 50mm wastegate - $900

Happy to split up kit and sellindividually.

No swaps.

post-53617-0-88049300-1330350625_thumb.jpg

post-53617-0-84443200-1330350634_thumb.jpg

post-53617-0-36190500-1330350642_thumb.jpg

post-53617-0-73974100-1330350667_thumb.jpg

post-53617-0-47484600-1330350691_thumb.jpg

post-53617-0-91106300-1330350696_thumb.jpg

post-53617-0-61903800-1330350724_thumb.jpg

I have no idea what you just did or wat any of that means but ok :)

Threads merged.

Read the forum rules before mass-spamming with singular threads in the future.

Brand new HKS turbo kit yet to be run. Waspart of an engine build that ran out of funding and has been un-used, wrappedin plastic ever since. Full turbo kit details are:

HKS 3037S turbo AR .87, 48T, GT25 Exhaustflange - $2,500

HKS Manifold - $1,100

HKS 50mm wastegate - $900

Happy to split up kit and sellindividually.

No swaps.

This is an RB25det Kit forgot to mention that.

I also have my Nismo gt lsd complete in the housing done less than 1000kms $1000 firm can pick up from Ipswich or pickup from my house in Brisbane.

post-53617-0-74473600-1330750634_thumb.jpg

post-53617-0-23158400-1330750657_thumb.jpg

post-53617-0-86398100-1330750682_thumb.jpg

post-53617-0-01115600-1330750706_thumb.jpg

post-53617-0-22489200-1330750729_thumb.jpg

post-53617-0-75639900-1330750752_thumb.jpg

post-53617-0-42642800-1330750770_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...