Jump to content
SAU Community

Recommended Posts

Hey Everyone,

Got some parts I wanna get rid of. Long story short, ex wanted her parts of the car back, so she got them, which has made me decide to want to 'upgrade' a touch. Anyway the following are parts I won't really be needing.

All parts are to suit a 32 gtr

Apexi PowerFc Djetro with hand controller, 2 maps sensors and wiring.

Asking $1200.

Used - for about 5000km, but good condition.

currently has a tune on it for a 2.8L with 800cc injectors and t04z.

willing to ship.

Safety21/Cusco 7? point roll cage

asking $850

Used - again for about 5000km, good condition, a couple of scratches here and there, nothing major. All bolts provided. i THINK i have the steel plates. will confirm once someone is interested. if not i can probably get some replacements made fairly easily.

prefer local pickup.

RB coil packs.

asking $300

Used - these were out of the working stock engine.

willing to ship.

SARD 800cc injectors (the light green tops)

asking $650

Used - for about 5000km again...

Willing to ship these as well.

If required I can get pics, didn't have any on my phone at the moment.

All items are located in North Brissie, however I work southside, so to an extent pickup could be from either north or south.

Best contact number for me is 0428 142 584. However usually can't answer phone calls during the day, so its best to send a text.

Best email is [email protected].

post-39837-0-35398200-1330511162_thumb.jpg

post-39837-0-73072100-1330511276_thumb.jpg

post-39837-0-07144400-1330511333_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/393368-r32-gtr-bits-for-sale/
Share on other sites

I've decided to also sell my AP racing brakes - fronts only.

These are to suit an R34, so have 14mm bolts. That said it is easy enough to get the hub drilled out on 32/33's to take a 14mm.

As with everything else, about 5000km on them. They are in good condition with plenty left in both the pads and the rotors.

I also had some custom braided lines made up for them.

Asking $4300 for the lot. This includes 2 x brackets, 2 x 6 pot calipers, 2 x 354mm 2-piece rotors, 2 x braided brake lines

While i'm at it. Would also be happy to sell the short motor component of my engine. Done about 5000km as well.

N1 Block

Tomei 2.8L cooling channel type kit

Tomei oil pump

ATI 1000hp type balancer with the pulley for the water pump.

Tomei sump baffle.

um... *shrug* 10k?

The head is off at the moment as it was going to get stripped. Happy to sell it too.

ported and polished

1mm oversize supertech valves

double valve springs

new guides etc.

I don't have the exact list of whats in it at the moment but would be happy to provide.

again... *shrug* $4500?

The engine build was done at JHH in Brisbane.

I also have a HKS Twin Power and harness to suit an r32 gtr

good condition, same as the rest.

asking $500

NPC twin plate clutch for a 32gtr, i was told its carbon composite or something.

It had no drama's holding however much power the 32 was making, (was at least 500hp atw)

asking $1100

Make offers on whatever people, worst I can say is no.

post-39837-0-01323900-1330589987_thumb.jpg

post-39837-0-29273300-1330590837_thumb.jpg

post-39837-0-62766000-1330590848_thumb.jpg

post-39837-0-14848900-1330590862_thumb.jpg

Edited by scissored sil

Marty, knowing what your kidneys are like i don't doubt it.

I also have 2 x Velo GPT seats with rails for r32 gtr...

the drivers seat has had about 5000km worth of usage, the passenger seat, i dunno, maybe 500km :D

Asking $1500 for the pair with the rails. I'll work on getting pics of these as well.

Here is some pics of the Brakes, Seats and TwinPower.

Ignore the couple of spots of rain on the seats, typical that just when you move them to take pics it starts spitting.

Also for sale:

rb26 greddy intake plenum, good condition.

Asking $800.

If anyone is interested in the complete head as is shown in the picture below minus the turbo and exhaust manifold (so intake plenum to the exhaust side of the head)

Asking $6300. Only thing not included is cam gears, but includes Greddy plenum, tomei dual entry fuel rail, sard 800cc injectors, std coil packs, std 6 throttle body setup.

head hardware basically all supertech, and all done at engine build approx 5000km ago.

dual valve springs

titanium retainers

spring seat locaters

kelford cams - 272 @ 10.55mm

oversize valves

bronze guides

hardened shims

rear head oil drain

intake adapter has been ported and matched.

head has been ported.

post-39837-0-73997500-1330749695_thumb.jpg

post-39837-0-13780800-1330749708_thumb.jpg

post-39837-0-14323300-1330749958_thumb.jpg

power fc sold pending payment.

still available:

rb26 coil packs - $250

r32 gtr full cage - $850

sard 800cc injectors - $600

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

Velo GPT seats and rails x 2 - $1500

engine is only half for sale, full motor - $16.5k, if it doesn't sell i'll just keep it.

still available:

rb26 coil packs - $250

r32 gtr full cage - $850

sard 800cc injectors - $600

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

Velo GPT seats and rails x 2 - $1500

!!Power FC is now sold and gone!!

rb26 coil packs - $200

r32 gtr full cage - $850

sard 800cc injectors - $600

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

Velo GPT seats and rails x 2 - $1500

Not trying to insult but on a major budget and determined to get the GTR to the sprints, would you take $500 cash for the cage with no plates and pickup at your convenience?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...