Jump to content
SAU Community

Recommended Posts

Hey Everyone,

Got some parts I wanna get rid of. Long story short, ex wanted her parts of the car back, so she got them, which has made me decide to want to 'upgrade' a touch. Anyway the following are parts I won't really be needing.

All parts are to suit a 32 gtr

Apexi PowerFc Djetro with hand controller, 2 maps sensors and wiring.

Asking $1200.

Used - for about 5000km, but good condition.

currently has a tune on it for a 2.8L with 800cc injectors and t04z.

willing to ship.

Safety21/Cusco 7? point roll cage

asking $850

Used - again for about 5000km, good condition, a couple of scratches here and there, nothing major. All bolts provided. i THINK i have the steel plates. will confirm once someone is interested. if not i can probably get some replacements made fairly easily.

prefer local pickup.

RB coil packs.

asking $300

Used - these were out of the working stock engine.

willing to ship.

SARD 800cc injectors (the light green tops)

asking $650

Used - for about 5000km again...

Willing to ship these as well.

If required I can get pics, didn't have any on my phone at the moment.

All items are located in North Brissie, however I work southside, so to an extent pickup could be from either north or south.

Best contact number for me is 0428 142 584. However usually can't answer phone calls during the day, so its best to send a text.

Best email is [email protected].

post-39837-0-35398200-1330511162_thumb.jpg

post-39837-0-73072100-1330511276_thumb.jpg

post-39837-0-07144400-1330511333_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/393368-r32-gtr-bits-for-sale/
Share on other sites

I've decided to also sell my AP racing brakes - fronts only.

These are to suit an R34, so have 14mm bolts. That said it is easy enough to get the hub drilled out on 32/33's to take a 14mm.

As with everything else, about 5000km on them. They are in good condition with plenty left in both the pads and the rotors.

I also had some custom braided lines made up for them.

Asking $4300 for the lot. This includes 2 x brackets, 2 x 6 pot calipers, 2 x 354mm 2-piece rotors, 2 x braided brake lines

While i'm at it. Would also be happy to sell the short motor component of my engine. Done about 5000km as well.

N1 Block

Tomei 2.8L cooling channel type kit

Tomei oil pump

ATI 1000hp type balancer with the pulley for the water pump.

Tomei sump baffle.

um... *shrug* 10k?

The head is off at the moment as it was going to get stripped. Happy to sell it too.

ported and polished

1mm oversize supertech valves

double valve springs

new guides etc.

I don't have the exact list of whats in it at the moment but would be happy to provide.

again... *shrug* $4500?

The engine build was done at JHH in Brisbane.

I also have a HKS Twin Power and harness to suit an r32 gtr

good condition, same as the rest.

asking $500

NPC twin plate clutch for a 32gtr, i was told its carbon composite or something.

It had no drama's holding however much power the 32 was making, (was at least 500hp atw)

asking $1100

Make offers on whatever people, worst I can say is no.

post-39837-0-01323900-1330589987_thumb.jpg

post-39837-0-29273300-1330590837_thumb.jpg

post-39837-0-62766000-1330590848_thumb.jpg

post-39837-0-14848900-1330590862_thumb.jpg

Edited by scissored sil

Marty, knowing what your kidneys are like i don't doubt it.

I also have 2 x Velo GPT seats with rails for r32 gtr...

the drivers seat has had about 5000km worth of usage, the passenger seat, i dunno, maybe 500km :D

Asking $1500 for the pair with the rails. I'll work on getting pics of these as well.

Here is some pics of the Brakes, Seats and TwinPower.

Ignore the couple of spots of rain on the seats, typical that just when you move them to take pics it starts spitting.

Also for sale:

rb26 greddy intake plenum, good condition.

Asking $800.

If anyone is interested in the complete head as is shown in the picture below minus the turbo and exhaust manifold (so intake plenum to the exhaust side of the head)

Asking $6300. Only thing not included is cam gears, but includes Greddy plenum, tomei dual entry fuel rail, sard 800cc injectors, std coil packs, std 6 throttle body setup.

head hardware basically all supertech, and all done at engine build approx 5000km ago.

dual valve springs

titanium retainers

spring seat locaters

kelford cams - 272 @ 10.55mm

oversize valves

bronze guides

hardened shims

rear head oil drain

intake adapter has been ported and matched.

head has been ported.

post-39837-0-73997500-1330749695_thumb.jpg

post-39837-0-13780800-1330749708_thumb.jpg

post-39837-0-14323300-1330749958_thumb.jpg

power fc sold pending payment.

still available:

rb26 coil packs - $250

r32 gtr full cage - $850

sard 800cc injectors - $600

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

Velo GPT seats and rails x 2 - $1500

engine is only half for sale, full motor - $16.5k, if it doesn't sell i'll just keep it.

still available:

rb26 coil packs - $250

r32 gtr full cage - $850

sard 800cc injectors - $600

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

Velo GPT seats and rails x 2 - $1500

!!Power FC is now sold and gone!!

rb26 coil packs - $200

r32 gtr full cage - $850

sard 800cc injectors - $600

AP racing 6 pot calipers, 354mm 2 pieces rotors and fitting hardware - $4300

Velo GPT seats and rails x 2 - $1500

Not trying to insult but on a major budget and determined to get the GTR to the sprints, would you take $500 cash for the cage with no plates and pickup at your convenience?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...