Jump to content
SAU Community

Recommended Posts

cool, what sort of km's have you done on them?

Whats the wear like?

Are they very grippy in 1st and 2nd gear?

Sorry for all the questions, but I want to be sure before I get a set :P

Chris

Link to comment
https://www.sau.com.au/forums/topic/39558-toyo-trampio-tpg/#findComment-803663
Share on other sites

I've done about 4 - 6,000k (can't give a definately figure sorry).

Wear is minimal so far.

They are very grippy in first and second :)

If you were in Perth I'd take you for a spin!

I'm very happy with them and many of the Perth Skyline guys have had these tyres and have all been happy with them.

Link to comment
https://www.sau.com.au/forums/topic/39558-toyo-trampio-tpg/#findComment-804362
Share on other sites

Seem pretty good

I have been able to get a good deal on some Dunlop FM901's, I can get these for the same price as the Toyo's, and from what I have read about them they seem to be really good

Anyone have have any recommendations on which one would be better? I have never had a set of Toyo's or Dunlops before

Chris

Link to comment
https://www.sau.com.au/forums/topic/39558-toyo-trampio-tpg/#findComment-805845
Share on other sites

chris, can u post prices pls :rant:

Didn't post prices, as my rims, 16x7.5 Buddy Club P1's are a bit oddball compared to what most people run, so tyre sizes/prices are a little differant compared to 17"

So far, I can get Dunlop FM901's for $200, Dunlop 3000A for $188, Yokohama 306's for $168, Toyo TPG Trampio for $195, Toyo T1S for 245

These are for 225/50/16

Best places to try for price seems to be Wise Chioce Tyres at Lonsdale, Blackwood Tyrepower and City Discount Tyres at Modbury

Chris

Link to comment
https://www.sau.com.au/forums/topic/39558-toyo-trampio-tpg/#findComment-806314
Share on other sites

Well, car is booked in Saturday to get some FM901's put on the back. I will also swap rims with the front and see if they are good for steering and braking as well

If they are next weekend I will buy two more :)

Will keep everyone posted

Also, interesting to note - this is my 7th tyre change in 3 years!!!!! :(

Link to comment
https://www.sau.com.au/forums/topic/39558-toyo-trampio-tpg/#findComment-810542
Share on other sites

Got the tyres fitted on the back on Saturday

So far so good, will wait until they scrub in before I pass judgement on them. Been raining on and off on the weekend so not ideal weather to test tyres in

Seem to be very good in the wet so far, only done about 250km on them

Swapped them to the front yesterday, and they seem to be quite good. The tyres previously were 205/55, and they were a tad small and streched on a 7.5"rim

With the 225's on the front, it feels a heap more stable and predictable. While swapping them over, just for a laugh, I whacked on my 17x9" rims with Bridgestone RE55S semi slicks on the back just to remind me what REAL grip is, I forgot how good these tyres where!

So far so good, am gettting another two this weekend, so hopefully should feel good with the FM901's all round

Chris

Link to comment
https://www.sau.com.au/forums/topic/39558-toyo-trampio-tpg/#findComment-819079
Share on other sites

Got any spare RE55s you want to get rid of?  I just booked mine in for some Falken Azenis RT215 semi slicks for the front, but doubt they will be anywhere as good as the RE55S

I wish Steve!! The ones that I have are well past the wear indicators, and I managed to pick up a nail yesterday in one. I will most probably get it reapaired and then just keep them for a few runs at AIR or a track day. They are a very very soft tyre, much softer than RE540S. Shame Laurie has left Bridgestone in town, as he used to give killer deals - I got my RE55S for $330ea, retail they are around $480. The new guy there seems ok, but price wise is similar to all the other outlets

I wouldn't reccomend the RE55S for a daily driven car, mine lasted about 2 1/2 months of everyday use, and only a fraction of that was driving fast - wear was shocking. Even yesterday, I did about 6-7km of 'spirited' :) driving, and your could see how much they worn, you can almost pick rubber of with your finger nails when they are warm

I have had a set of Azenis semi slicks as well, IMHO get a set of Bridgstone SO3's for the front. They are by far the best match for a road tyre with a set of R spec tyres on the back. I switched from Azenis to SO3's, they were much much better tyres - grip everywhere even in really wet conditions. The Azenis are ok, but the SO3's were miles better in every way, and they dont wear as fast - my set on the front of my 17's have done over 9000km and are still in great condition, and they use the same rubber all the way through, so they don't get hard and slippery when they wear a bit

Any questions just ask

Chris

Link to comment
https://www.sau.com.au/forums/topic/39558-toyo-trampio-tpg/#findComment-819425
Share on other sites

Hmm, at twice the price, are they really worth it?

For front tyres on a car like yours Steve, I'd go for something really high end, and the SO3 is a great tyre

Enrico - all tyres will wear, as long as they are alligned properly there is no reason you can't get good kms out of them. I'd say for SO3's you should be able to get 20-25000km out of them if you keep them rotated etc. SO2's where much softer than the SO3's though, on HSV's they where struggling to get 10,000km out of them, SO3's are better

Steve, ask Freebaggin how good his SO3's are on the front of his car, from what he has told me they have got him out of a few interesting moments :(

Just my opinion though, as I have had both on the front, and SO3's were by far the better tyre

Link to comment
https://www.sau.com.au/forums/topic/39558-toyo-trampio-tpg/#findComment-819471
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...