Upper Control Arm Now Touching Wheel. Help Please

[Ty1]

hey guys have a bit of a problem at the moment. I just replaced all the bushes in the front end of the car. I removed the upper control arm, the arm that joins the upper and lower control arm and the lower control arm and took them to the mechanics to get the new bushes pressed in. I also replaced both tie rod ends as well. I've now got super-pro adjustable upper control arm bushes(outer). Anyway after fitting everything back together and putting the wheels back on, the upper controls arms are now touching the tyres as you can see in the picture where as they weren't doing this before. Is this to do with adjusting the camber? or have I done something else wrong? Any help would be great as I can't even drive it to get a wheel alignment. Thanks!

[Tommy Kaira RL]

Try turning the bushes 180 deg. It looks like the bolt goes through the bottom. If the hole was on the top then it would lift the outer arms.

[Ty1]

success! lol thanx for that ducati. what I had to do was loosen off the nut and short bolt and tighten the long bolt resulting in the bushes rotating and pushing the arm up. now to get a wheel alignment