Stagea Dayz Spotlights Wiring

[bentwagon]

I got most of the wiring loom when i got the lights but i need help sorting it out, so here it goes.

Taken from another post about the spotlights - helps a little.

How i can best describe the wiring, just one side - both sides seem the same.

In this picture I dont know where plug A goes. Plug B and C fit the Fog light, i suspect the blue, black and orange wires should have the same plug type as Plug C.

Photo of the loom.

Photo of the plugs.

Photo of the switch (on dash).

Any help or photos appriciated - hope to get this finally sorted out on this forum once and for all.

[matt-turner]

I got most of the wiring loom when i got the lights but i need help sorting it out, so here it goes.

Taken from another post about the spotlights - helps a little.

How i can best describe the wiring, just one side - both sides seem the same.

In this picture I dont know where plug A goes. Plug B and C fit the Fog light, i suspect the blue, black and orange wires should have the same plug type as Plug C.

Photo of the loom.

Photo of the plugs.

Photo of the switch (on dash).

Any help or photos appriciated - hope to get this finally sorted out on this forum once and for all.

[matt-turner]

Hey mate theres a grey plug near the drivers side head light or behind it that the relays and main loom plug into. In the car the switch has a earth and then theres a connector near the throttle cable on the fire wall pretty sure it a 2 wire connector. If u need more info let me know and I'll take photos and send them to u

[bentwagon]

I'm going for as much info/photos as I can so this can be a good thread for others trying to sort this out too. Photos of where the plus I have labled would be great.

[dirtyRS4]

so this can be a good thread for others trying to sort this out too.

i am installing dayz spotties.

so this will be handy

[bentwagon]

i am installing dayz spotties.

so this will be handy

Got any pics of the loom you have?

[bentwagon]

These photos supplied by user matt-turner

I've been told more to come...

[bentwagon]

more from Matt-turner

Red-blue from switch to blank plug near throttle cable to yellow-red out of the two wires

[bentwagon]

I believe this is the relay setup we are trying to achieve.

[bentwagon]

so it seems im missing a few parts of the loom, from what i can gather there is a

1 the loom that switchA plugs into by plug D, that then goes to earth and a plug beside the drivers foot (yup we have a plug).

2 the loom that plugs into next to the battery to the relays (plug A)

3 also missing the plug in the loom above (unknown wires) that i believe will be the same type as plug B but not sure if it should be Male or Female.

Any light shed on this would be great - or even if you have these parts or a full loom laying around, i would be interested.

Cheers

[RBW49N]

Anyone got these harness parts lying around?