Jump to content
SAU Community

Recommended Posts

So I need some fuel system parts. Not much going on here in Canada or the US as far as I can find.

Torques U.K (ebay shop) sells what I'm after but I can't find reliable reviews. Are their parts really comparable to Aeroquip/earls and are their pumps legit Bosch 044s? Thanks guys.

Setup is overkill for 600whp but our tuners suck as does our fuel lol need to go rich.

http://stores.ebay.co.uk/Torques-U-K/_i.html?_fsub=1978723012

They would have everything but a cooler fo me...

Edited by NismoSTune

Another option is a locally (well, to us anyway) and very trusted company "Motorsport Connections" in Seven Hills in Sydney. http://www.mscn.com.au/Scripts/prodList.asp

Just an option for you as these guys have heaps of good reviews so if you dont use ebay and need a back up it's a great place to start.

Ah good stuff. They seem to have what I'm after but can't seem to find what make of hose and fittings they use. I currently have earls lines and need the Teflon lines for the trunk only so it all has to fr snug.

Can't seem to find many -8 fittings for earls -8 Teflon lines...

On that note, maybe someone can confirm what I'm thinking here. I've done some searching but didnt come up with much. My car is modded a fair bit but the fuel worries me...

So, for 650whp (so I don't have to upgrade a 3rd time when I change the turbo down the road), will twin -6An feeds (out of twin 044s/ 3L swirl pot) and -8 return be ok for flow? Using HKS fuel rail and ID 1000cc injectors with tomei lift pump.

Would I need a -10 return?

Back on topic, anyone recommend a good fuel cooler for the -8 or -10 return? Checking out setrab for a cooler.

Our tuners around here get us into the low 10 to high 9:1 afr (on 94 pump) at wot, so my fuel is taxed haha

Edited by NismoSTune

I ordered teflon fuel lines from Torques UK after my locally supplied teflon hoses leaked continuously. His ones have been fine for over a year running e85, never leaked once. I run twin Walbro's, twin -6 lines with a single -6 return and fuel pressures are fine.

Make sure you always match the fittings with the same brand of hose, eg. if you have Earls lines get Earls fittings.

I need to look into a fuel cooler myself if anyone has information on them.

Ah thanks for the feedback on torques. So when you say locally, what shop or make of hose was that (you can pm if it'll insult someone on a public forum...)

As for the fittings, I plan on using the hose ends sold with the hose but will attempt to transition to my earls front lines with unions....... Might have us O ringed -an threads...

My that's a small return. When you idle or cruise, doesn't 99% of the fuel return? Those pumps should be overkill on a single -6 (return) no?

PM'd

If you look at the hole in the bottom of the reg you will realise the -6 line is plenty but you can use -8 if you're worried. Like I said I have no issues with my setup.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...