Jump to content
SAU Community

Recommended Posts

Hey guys

Few left over bits and pieces from my car up for sale.

R33 Chromed Intake Runners

Spent weeks sanding smooth the runners and polishing them before getting them chrome dipped to match my Plazmaman plenum. The chroming cost me more than the price i'm asking!

First photo is as they sit at the moment. Needs some metal polish and a rag to buff them up to be 100% as seen in the other two photos.

dsc01455o.jpg338220309460317636afo.jpg3381385307f0bb73a291o.jpg

60mm Blitz AC Series Mechanical Boost Gauge $150

60mm Blitz AC Series Electric Exhaust Gas Temp Gauge $150

Will do both for $250

Very hard to get gauges now as Blitz no longer make them. Fit perfectly in a Greddy A pillar gauge. One of my very gauges and they illuminate a gorgeous white with red needle at night time.

post-35676-0-24994500-1334393754_thumb.jpg

40mm Cooling Pro Alloy Radiator (fits factory shroud)

Good upgrade to the factory item and fits perfectly with all the factory gear.

Nismo/Tomei R33 GTST Fuel Pump (direct plug and play)

Very easy install and good for over 300rwkw on a GTST. Will also suit a S14 Silvia. Very quite unit that is one of the best fuel pump upgrades available.

post-35676-0-41674200-1334393818_thumb.jpg

Greddy Turbo Timer Black $40

Your normal Greddy turbo timer that every one has. Has a bunch of extra features like lap timer, 0-100, voltage display etc.

Nos Nitrous Universal Wet Kit

Comes with a purge kit and also a 3/4 filled bottle. Jetting is from 50-150HP and can be installed very easily on any EFI car with just a tee piece from a fuel line. No tuning required.

(Please note this can not be freighted and only local pickup is available)

All items are located in Townsville North QLD and can freight Australia wide with E-go for cheap (other than the nitrous kit).

Any questions just feel free to ask. Will take some more photos of the other items this weekend.

Cheers

Phil

It's used buddy. Out of my R33 GTST Skyline. Only getting rid of it because I parted my car out.

Has done probably 20,000km. Looks basically new.

Can chuck a photo up tomorrow if you want.

Nah that's cool. By the time I added in postage i'd be better off getting a new one.

Thanks for the reply though.

Can do it for $220 delivered if you want.

They are $320 brand new from Just Jap plus freight, so maybe $350. Still a good saving.

Food for thought.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...