Jump to content
SAU Community

Recommended Posts

Greddy engine oil cap $40

Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120

S14 C's short shifter $150

S14/s15 Cusco Rear strut tower brace $180

S14/s14a genuine ganador mirrors (black) rough paint, need repainting $180

S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550

S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180

S14 Sniper Racing Carbon fibre trunk (wet layup carbon, no brake light hole) (brand new) $450

S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250

S14.5 Origin +25mm conversion fenders (brand new) $450

S14 Origin +50mm rear fenders (brand new) $450

S14 light weight fibreglass doors (brand new) $900

S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,000

S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100

S15 factory rear boot spoler with led's, pewter colour $120

S15 JDM factory steering wheel with airbag $250

S15 Hybrid aluminium radiator $250

S15 Stage21 aero front bar (painted blue) $350

S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300

S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3500 (new price from PWR is $4300)

S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700

C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100

Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,700 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body)

HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300

PWR custom intercooler 600 x 300mm x 74mm core $600

STACK 8130 dash with sensors and loom $1,800

ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono

R34 GTR Cusco Type-40 aluminium strut tower brace $240

R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750

R34 GTR C-west carbon fibre cannards for N1 bar $350

R34 GTR Nismo dash cluster (black version) (brand new) $700

R34 GTR/GTT Nismo GT LED tail lights $1,200

4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1400

RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,300

RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800

RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000

SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100

** can post wheels interstate if needed at buyers cost **

Parts are used unless stated brand new

Pickup available from Melbourne, St Kilda/Prahran area

Not willing to post large/heavy/fragile items interstate (unless you arrange your own courier)

Buyers in Australia only - no international inquiries thanks

Photos of most items here, email me if not - http://s1116.photobucket.com/albums/k569/jdm7777/

Email [email protected]

  • Replies 151
  • Created
  • Last Reply

Top Posters In This Topic

can do a slight discount if buying multiple items..... make an offer, all has to go! the worst I can say is no... LOWBALLERS come at me! :P

pffft. why would i trade for inferior tyres. PASS

maybe you have another car thats a daily you dont want to waste semi's on and have cash your way... they are a fantastic tyre for their class, one of the best in their category for the money they are. Comparable to PS2....

Nope not interested thanks.

*** S14 ganador mirrors sold

*** S14 carbon boot lid sold

*** PWR intercooler sold

ok fair enough.

$800 if you dont get any offers, what i just paid for a set of RS3 265/285 new.. im in no hurry even if u have them 6 months from now offer still stands if i dont find another set cheap.

Hey, slightly off topic, do you have a tailshaft for sale? And do you know if r34 front & s15 rear connections are different? I am going with r34 box & s15 diff.

Cheers.

Hey mate , tried PM'ing but says you can't receive messages, anyway interested in the Nismo cluster , sms me on 0434112724 , ill pick it up from your area for $700.

Thanks , Johnny

nismo cluster sold - Cheers Johnny, nice to meet you mate :)

pics of lmgt4's 18x9 +22 with advan v103 tyres $2800

ATP 'frank' turbo + stainless steel manifold, oil and water lines included. $1100

pair of SSR type-c wheels 17x9.5 +15 offset, weigh only 7.8kg each $1200 for the pair

all other items for sale unless i've said sold - pics in the link above.

My inbox is full on purpose, email me instead [email protected] <-- two zero's in boost

post-10650-0-46883400-1336800541_thumb.jpg

post-10650-0-67941700-1336800559_thumb.jpg

post-10650-0-41594600-1336800639_thumb.jpg

post-10650-0-69911600-1336800655_thumb.jpg

post-10650-0-49001600-1336800674_thumb.jpg

post-10650-0-45984500-1336800687_thumb.jpg

any idea on frieght costs to S.A for the lexan window kit?

Freight would be only about $50 to Adelaide via Transdirect, as they are quite light weight.

RoadExpress is an estimated 1-2 business day service and includes a conditional Transit Warranty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...