Jump to content
SAU Community

Recommended Posts

  • Replies 151
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Updated list:

New parts:

Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120

S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180

S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250

S14.5 Origin +25mm conversion fenders (brand new) $450

S14 Origin +50mm rear fenders (brand new) $450

S14 light weight fibreglass doors (brand new) $900

S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,050

S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100

used parts:

Greddy engine oil cap $40

S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550

S15 factory rear boot spoler with led's, pewter colour $120

S15 JDM factory steering wheel with airbag $250

S15 Hybrid aluminium radiator $250

S15 Stage21 aero front bar (painted blue) $350

S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300

S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3500 (new price from PWR is $4300)

S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700

C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100

Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,750 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body).. save over $800 off new prices

HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300

STACK 8130 dash with sensors and loom $1,800

ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono

R34 GTR Cusco Type-40 aluminium strut tower brace $240

R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750

R34 GTR C-west carbon fibre cannards for N1 bar $350

R34 GTR Nismo dash cluster (black version) (brand new) $700

R34 GTR/GTT Nismo GT LED tail lights $1,200

4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1300 firm

RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,200 firm

RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800

RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000

SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100

** can post wheels interstate if needed at buyers cost **

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...