Jump to content
SAU Community

Recommended Posts

  • Replies 151
  • Created
  • Last Reply

Top Posters In This Topic

  • 4 weeks later...

Bump

New parts:

Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120

S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180

S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250

S14.5 Origin +25mm conversion fenders (brand new) $450

S14 Origin +50mm rear fenders (brand new) $450

S14 light weight fibreglass doors (brand new) $900

S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,050

S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100

used parts:

Greddy engine oil cap $40

S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550

S15 factory rear boot spoler with led's, pewter colour $120

S15 JDM factory steering wheel with airbag $250

S15 Hybrid aluminium radiator $250

S15 Stage21 aero front bar (painted blue) $350

S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300

S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3200 (new price from PWR is $4300)

S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700

C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100

Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,750 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body).. save over $800 off new prices

HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300

STACK 8130 dash with sensors and loom $1,800

ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono

R34 GTR Cusco Type-40 aluminium strut tower brace $240

R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750

R34 GTR C-west carbon fibre cannards for N1 bar $350

R34 GTR Nismo dash cluster (black version) (brand new) $700

R34 GTR/GTT Nismo GT LED tail lights $1,200

4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1300

RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,200 firm

RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800

RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000

SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100

** can post wheels interstate if needed at buyers cost **

still for sale!

New parts:

Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120

S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180

S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250

S14.5 Origin +25mm conversion fenders (brand new) $450

S14 Origin +50mm rear fenders (brand new) $450

S14 light weight fibreglass doors (brand new) $900

S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,050

S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100

used parts:

Greddy engine oil cap $40

S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550

S15 factory rear boot spoler with led's, pewter colour $120

S15 JDM factory steering wheel with airbag $250

S15 Hybrid aluminium radiator $250

S15 Stage21 aero front bar (painted blue) $350

S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300

S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3200 (new price from PWR is $4300)

S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700

C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100

Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,750 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body).. save over $800 off new prices

HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300

STACK 8130 dash with sensors and loom $1,800

ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono

R34 GTR Cusco Type-40 aluminium strut tower brace $240

R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750

R34 GTR C-west carbon fibre cannards for N1 bar $350

R34 GTR Nismo dash cluster (black version) (brand new) $700 sold

R34 GTR/GTT Nismo GT LED tail lights $1,200

4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1300

RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,200 firm

RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800

RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000

SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100

** can post wheels interstate if needed at buyers cost **

bump!!!!! Rawwwrr.. buy my shit!

SimonR32 sent you a pm buddy. Not really keen to send interstate, i don't have time to arrange the freight etc. Let me know

Hahaha. Indeed.. But try dealing with 500 low ballers then you may understand the frustration that comes with selling parts on forums.. not so much SAU, but always on nissan silvia.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...